Jump to content

Glanza-V

Member
  • Content Count

    44
  • Joined

  • Last visited

Posts posted by Glanza-V

  1. Tahnx for the + Comments

    Mani Cost Over £500 (specl Discount) But prices have gone up on the K26 mani @ Nortons.

    Touch Wood really happy with Nortecs Service sooo far + cant fault the Manifold.

    Also

    The Car Performance is not going to stop, i really want to break into the 300 BHP mark, Hopefully should get close when i turn the Boost up to 1.5 Bar, and if needs be il get the full head Ported with Performace Cams!

    The Turbo is capable of alot more, and so is the Forged engine so 196 @ .7 bar is just a start!

  2. Slight update

    13072008852.jpg

    13072008854.jpg

    Drove the car for a couple of thousand miles on standard low boost @ .7 bar Everything was runing perfect except one thing

    the STUPID "Sard manifold"

    the manifold cracked from alot of places and wasnt even worth the WELD, so i decided to go to CUSTOM MADE

    Went to Nortec Performance (Corsa Specialists) to get my manifold made.

    210820081049.jpg

    210820081047.jpg

    210820081048.jpg

    DSC01055.jpg

    Got My TRD Dial Cluster Fitted

    28072008943.jpg

    Also got my Indigio Dials fitted (thanx Sham)

    28072008944.jpg

    Changed the Alloys wheels to something slighlty more JAP

    15" Enkei 5 Spoke White

    Brand New Parada Tyres

    070920081145.jpg

    Also got front Recaro rails , so I've fitted my Recaro interior

    Pics are to follow

    Everything is running fine on the car atm TOUCH WOOD

    Recently we organised a RWYB Day and being a Track Virgin the AK91 Got

    14.4 Sec @ .7 bar

    Today We had a R/Road Meet and AK91 got

    181020081496.jpg

    181020081494.jpg

    DSC01057.jpg

    DSC01056.jpg

    196.7 BHP @ 7250 RPM

    148 FTLB @ 6250 RPM

    Still at .7 bar

    BHP & Torque

    181020081528.jpg

    BHP & Fueling

    181020081529.jpg

    Well at the Moment this is how the car Stands

    **** MANAGEMENT ****

    JAM Racing ECU

    *Bee*R Rev-Limter

    *Bee*R Launch Control

    **** ENGINE ****

    *4EFTE Engine

    *Pauter Rods

    *Ross Racing Pistons 74mm

    *Zep's 2mm Racing Head Gasket

    *5E Cams

    *5E Head

    *Zep Racing Baffled Sump

    *Re-Ground Crank

    *Lightweight Underdrive Crank Pulley

    *Mocal ReLocated Oil Cooler/Pipes

    *460cc Injectors

    *Norton's Custom Manifold

    *Blitz K26 Turbo

    *Blitz K26 Adapter plate

    *Sard Type CII External Wastegate (off Manifold)

    *Blitz 2" Downpipe.

    *Blitz Nur Spec Exhaust

    *HKS DumpValve

    *Section Engine Damper

    *Blitz LM Front Mount Intercooler

    *Blitz Pipe Kit

    *HKS Induction Kit Reclocated

    *HKS Actuator

    *TRD 1.3 Bar rad cap

    *TRD Engine Mounts

    *Samaco Blue Piping kit

    *Cusco Cooling Panel

    *Powder Coated Red Top Engine

    *NGK Performance HT Leads

    *NGK SPark Plugs

    *Sard Rising Rate Fuel Pressure Regulator

    *Sard Low Temp Thermostat

    *Grounding Earthing Stabliser Kit

    *A/c Removed

    **** GEARBOX/CLUTCH ****

    *TRD Limited Slip Diff

    *Excedy Uprated Clutch

    *Braided Clutch line

    **** EXTERIOR ****

    *98 Spec Front Bumper

    *98 Spec Optional Front Splitter

    *98 Spec Front HeadLights

    *98 Spec Crystal Clear Fog Lights

    *98 Spec Rear Lights

    *Clear lenses

    *Raised Glanza-S Bonnet

    *M3 Carbon Mirrors/indicator lights

    *Rear 5% Limo Black Tints

    *Front Light smoked Tints

    *Toyota wind deflectors

    **** INTERIOR ****

    *Plasma Dials

    *TRD Carbon Dials Cover

    *Blitz Turbo Timer

    *EK9/Integra Gear Shifter

    *Nardi steering wheel.

    *Blitz Boost gauge

    *Full Recaro Seats

    *Bride Sub Frames

    **** BRAKES ****

    *EBC 10 Grooved/Dimpled Disks

    *Cusco Brake Cylinder

    *GreenStuff Brake Pads

    *ARP Braided Hoses all round

    *Red Brake Calipers

    **** WHEELS/TYRES ****

    *Enkie White Alloys

    *Parada Spec II

    *LightWeight Nuts

    **** SUSPENSION/HANDLING ****

    *Tein Type Flex coilovers

    *Cusco Upper Strut brace

    *Zep's Mid Floor Brace

    *Rear 4-Point Miracle Brace

    *TRD Antiroll bar

    *Cusco Panhard rod

    **** AUDIO ****

    *Alpine Front Speakers

    *Alpine Rear Speakers

    **** SECURITY ****

    *Clifford Concept 650 MK2

    *Tracker

    *Disk Lock

    This is what I've GOT laying around to go in

    *GReddy Emanage Blue

    *GReddy E-01 Boost Controller

    *Cusco Catch Can

    *Cusco front Lower Brace

    *Defi Control Box

    *Defi Tacho with S/Light

    *Defi Boost

    *Defi Oil Temp

    *Defi Oil Press

    *Defi Water Temp

    *LRZ Xenon Kit 10K

    I Need

    A Decent Head Unit (as the imported one's screen fucked up :lol:

    Anyways

    Thanx for taking time out and having a read of the Project.

    Will keep the thread updated with a few more pics

    Akki

  3. Im Back again.

    Akki Khan's - Project AK-91

    Hey Peeps... Just thort id put a thread on my new Personal Glanza

    Enjoy

    This is how the car started...................

    *Recently Replaced Engine

    *JAM Racing ECU

    *Bee*R Rev-Limter + Launch Control

    *TRD Limited Slip Diff

    *Blitz Active Clutch

    *Section Engine Damper

    *Apexi Cat Back exhaust

    *Road Runner Mild steel Manifold

    *Gutted Cat

    *Blitz FMIC

    *Blitz Pipe kit

    *HKS Induction kit

    *HKS Actuator

    *Tein Type Flex coilovers

    *Cusco Upper Strut brace

    *Zep's Mid Floor Brace

    *Rear 4-Point Miracle Brace

    *TRD Antiroll bar

    *Lenso RS5 Alloys White/Silver Rim

    *EBC 10 Grooved/Dimpled Disks

    *Cusco Brake Cylinder

    *Braided Clutch line

    *GreenStuff Brake Pads

    *ARP Braided Hoses all round

    *Cusco Panhard rod

    *TRD 1.3 Bar rad cap

    *TRD Engine Mounts

    *TRD Quick Shift

    *??? Turbo Timer

    *EK9/Integra Gear Shifter

    *Samaco Blue Piping kit

    *Cusco Cooling Panel

    *Powder Coated Red Top Engine

    *Red Brake Calipers

    *NGK Performance HT Leads

    *NGK SPark Plugs

    *Sard Rising rate fuel pressure regulator

    *Sard Low Temp Thermostat

    *Grounding Earthing Stabliser Kit

    *98 Spec Front Bumper

    *98 Spec Optional Front Splitter

    *98 Spec Front HeadLights

    *98 Spec Crystal Clear Fog Lights

    *Clear lenses

    *Raised Glanza-S Bonnet

    *M3 Carbon Mirrors/indicator lights

    *Nardi steering wheel.

    *Blitz Boost gauge

    *Alpine Front Speakers

    *Alpine Rear Speakers

    *Toyota wind deflectors

    *A/c Removed

    *Clifford Concept 650 MK2

    *Rear 5% Limo Black Tints

    *Front Light smoked Tints

    21042008215.jpg

    21042008216.jpg

    21042008217.jpg

    21042008218.jpg

    21042008219.jpg

    21042008220.jpg

    21042008221.jpg

    21042008222.jpg

    21042008224.jpg

    21042008225.jpg

    21042008229.jpg

    21042008231.jpg

    21042008232.jpg

    21042008233.jpg

    Fitted my 7" Bluetooth Touchscreen DVD Player/TV/MP4/SD

    Its not a flashy make but hey it does a wicked job.

    Connected my N95 8GB and hey its fun.

    21042008228.jpg

    Just a minor adjustment in the rear depatment

    07052008342.jpg

    and yay thort id keep my fluids wrapped up hehe

    07052008339.jpg

    TRD S/fluid Cover

    TRD B/fluid Cover

    Been really busy at the moment, so the BIG MODz will have to wait

    Minor Modz being done.

    31052008503.jpg

    31052008504.jpg

    31052008505.jpg

    99Spec lights fitted

    Rear Recaros Seats fitted

    31052008510.jpg

    Awaiting Front Frames, when ever i get hold of some.

    and a big problem accured..........

    31052008513.jpg

    Nooooooooooooooooooo!

    Update

    Car is in Garage

    having just a few changes done to her

    4EFTE Engine

    Pauter Rods

    Ross Racing Pistons 74mm

    Re-Ground Crank

    2mm Zep Racing Head Gasket

    5E Cams

    5E Head

    Zep Racing Baffled Sump

    460cc Injectors

    Relocated Oil Cooler/Pipes

    Lightweight Underdrive Crank Pulley

    Blitz K26 Turbo

    Blitz K26 Adapter plate

    Sard Manifold

    Sard Type CII External Wastegate (off Manifold)

    Blitz Downpipe.

    Blitz Nur Spec Exhaust

    HKS DumpValve

    Just needing an

    Boost Controller

    Oil Catch Can

    Cars been up and runnig for a week, and its going well. Running .7bar

    STILL WAITING on getting my hands on a E-01.

    Got a small hair line crack in the manifold again, but its not effecting em so much.

    Just sum crappy pics that were taken in progress

    19062008675.jpg

    19062008676.jpg

    21062008696.jpg

    Intercooler pipe, made to fit.

    25062008726.jpg

    Blitz Nur Spec was put on

    20062008691.jpg

    And final Result

    Akki's Forged 4E-FTE Engine Powered By Blitz/Sard K26 Turbo Set up

    01072008743.jpg

    Very impressed with her so far.

    Cant wwait to put her on rollers.

  4. Just an update ... as i dont seem to use this site often

    Only a few "CRAPPY CHEAP MODz!"

    1. Removing Air Con

    2. Relocation HKS Air Filter

    3. Putting CAP 4 Paddle Clutch In

    4. Fitting CUSCO Differntial Gearbox

    5. Fitting Cusco Brake Cylinder Stopper

    6. Fitting Mintex 1142 Brake Pads

    7. Cleaning Engine Bay

    and waht ever i can take from thier!

    181020072302.jpg

    181020072301.jpg

    181020072300.jpg

    171020072271.jpg

    my sexy kit

    191020072336.jpg

    191020072338.jpg

    201020072351.jpg

    polished and cleaned

    201020072373.jpg

×
×
  • Create New...