raffa_mk

Left a bit ago, no good cars to my taste, many mk2 golfs about, use too see some good cars here but that's 6 months back when Glanza,s were kicking about,

Think I saw rob in his ep next to meadowhall put my hand up as I crossed past at lights

Any in here around this area? All I c is golfs n asta n pugs

LukEp>>>> my excisting bolts does not even go all the way through the bar end? It's a few mm's small!!! Got some bigger bolts from Bnq but one was too thick n the other was slightly slimmer and does not lock into place as thread slips... Need help guys.. Going to get intouch with skillmat guy as it's doing my nut in and loosing patience

Hi, and a warn welcome Just seen your reply to my spotted section. Was thinking of buying it but prefer White / black Glanza Hopefully c u at meets as am local Raffa

might be worth posting on http://www.toyotagtturbo.com/forums/ if you haven't done so already...

tried to fit it like your LukEp..... but it doesnt work for me, have a look at the first pic, sorry about the poor quality, but the holes dont line up... will have to do it like dan but remove the plastic as it looks better as shown in the 2nd pic, all i need now is the longer bolts and a few washers... really helps when you have photobucket app on the iphone

guna have another crack at it now, can't stand it being stuck in the house and with shrek on the TV....

Mmmm, does it make a difference if it a n/a or ep91 LukEp? like i mentioned its the 2 parts that make it not sit right and i dont think the plastic bends or flexes. will have to have another crack at it.

Yeh i would have thought it would be the other way around, going to got for long bolts and washers then,

LukEp>>> i got from sikillamart too from the last group buy.

thanks Dan, What length bolts did you get? Now the problem i have is all the DIY shops are closed for today

My ep got a c-pillar bar, and a JapSpeed Cat back exhaust system. Sparky>>> Love the KeyRing!

i have bought a c-pillar bar for my ep91, i have removed the plastic covers and took the bolt out, the problem iam facing is when i put the excisting bolt through the end of the c-pillar bar and then the seat belt hehind it, it does not fit flat and i cant get the bolt through the hole, i have circled the parts it touches in the pic. Please help guys as want to get this fitted asap as it should be a simple job. Pic below.

Looks great, but having the Rock in it has spoilt it for me in terms of actors, but loving the cars as usual, I heard they are going to do this on 3D?

Why should you not attach it to the strut brace? I've seen it on a few cars,,,

i have recently purchase some seats and want to get a 4 point harness, however i dont know where to start with by securing the harness to? i want to be able to use my rear seats so attaching them to my rear strut bar is not going to work, i want to know where you girls/guys have secured yours to and would like some pics please. I am thinking of getting a floor bar if i can attach it to that, but someone mentioned to me that its too low? i have also seen a seat belt harness bar on ebay but cant find one for starlets, link below. http://cgi.ebay.com/ebaymotors/Seat-Belt-H...sQ5fAccessories

yes, yellow top batterys are awesome, i can listen to my ICE for over an hour without the battery dying! i also have voltage reader on my headunit which is awesome! so whilst i wash my car i just crank it up with little bass so i dont get complaints from neighbours,

^^^ As above dynamat all the way, its probably what alot of you ep owners should look at when you strip out all the plastics and interior to reduce road noise that you guys complain about, however dynamat is quite costly, maby you could look at other materials that have the same properties???

Having an ice stystem in small hatch always sounds better than bigger cars in my opinion, unless u have a 4x4 or pickup with Ooober low bass setup and creating a speaker wall, I love my ice system, then my exhaust and finally some comfy seats.

I currently have a pioneer P88rsII headunit, got alpine type X 17Pro Components ans Alpine Type R SPR17 Coax at front running off alpine PDX 4.100 AMP Then i currently now have 2X 12" Alpine Type R Subs Each powered by Alpine PDX 1.1000 Amps 2 Ground Zero 1Farad power Caps All running off yellow top battery, I have 2 Alpine Type X subs which Drained my Car And pounded it too much, too powerfull for a daily driver syestem so stuck with type Rs and Sold the X's at a Loss. I have a collection of head units, all pioneer, used alpine, which you can tweek alot but look very dated to my liking.

indeed this is the one, nice one lads...Thought it was Rob, but didnt know his second name..... is he from sheffield? or was he just passing by??? Luke EP >>> like your pic of the little Kitty LOL

seen you around 6pm down morefields heading towards penistone road, you had orange wheels, tte spoiler and a c-pillar bar showing in the rear window.

like the boot build, into audio systems myself, What size are your front speakers? got 6.5 my self and they are very loud and crisp, and again got the speakers in the same place as you and tweeter, at least you can use your boot, i can't even put a packet of crisps in mine LOL,

thinking of giving it a miss then and use the money on buying some stickers for the car then, thanks for the pic,