-
Content Count
65 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by batmanglanza
-
-
I want the ep91 livesports please
-
Is this still for sale?
Is this still for sale?
-
will u do the intercooler pipes separate?
-
u still got this for sale mate?
-
ok. i would try the map sensor then and these cars are more fun wen u turn the boost up lol.
Anyone got the MAP sensor part number? I'll give it a try, having read up on what it does it could explain the holding back on kick down too.@batmanglanza - I don't have an FCD as i've no plans to go above 0.7 BAR
-
if u hav got a fuel cut defender fitted then disconnect it and try that. mine used to do the same but wen i tuk the fcd off it pulled like a train agen.
So what mods did you do to restore the initial pickup? Mine doesn't fuel cut, and is set to 0.7 bar, turbo pulls ok as far as i can tell, holds 0.7 all the way up in first, just plays around on kick down at 4000 RPM and when it gets to 5100 RPM almost like flat spots. -
-
does anybody know if the celica and mr2 use the same map sensor as the glanza?
-
my ht lead does the same and mine stutters when i put my foot down until i get to about 4000 rpm then it starts pullin agen. duno wots goin on.
Alrite guys i have a couple of issues i need to deal with on the gt.it started off with at idle my afr's would jump to between 16-17 but when throttle was applied and moving it would return to normal, i changed air temp sensor never done a thing so was advised to change water temp sensor so i did with a spare i had lying around it worked afr's went back to normal that was over a week ago and its started it all over again ?
i have also checked my idle control valve i took it apart and noticed that the brass disc in it that has 3 legs on it well one of them has snapped could this be causing this issue ?
and now the strange issue i have is HT lead on cylinder 2 keeps jumping out and it then runs on 3 cylinders i have no clue as to why this is happening ?
Cheers guys for any help yous can give
-
u cant leave. i knw where u liv. i will hunt u dwn lol.
what u talking about. red tap is hot water and blue tap is cold water and orange tap in the middle is the bru. pretty basic setup i think. santa is real but hes just satan in discuise -
22) batmanglanza and mate in h22 conversion
count me inUKSC
1)cheshireglanza
2)markoos
3)drew 007
4)redz11
5)DavidAshton
6) Miib14
7) kennedy
8)bluebell
9) Ro55ifumi
10) Craig_N in the V (YES THE V)
11) Danny gt
12) Shib786, Nas(Livesport EP82 from last time) + few others!
13) Fizturbo in GT, + mate in Skyline
14)mrkhan
15) Cazzac2222 (Zac)
16) lukEp
17) Nastyrash
18) Dean @ RW-Developments
19) CRAIG-SR
20)lukerobz
21) lew777
-
the blueprint one i bought you had to swap the bracket of the old one, just bought toyota one and comes with bracket although still dont think its the same as whats come off even tho part number same the inlet hole is still bigger so see if it seals later
will the standard fuel filters fit the glanza v
-
Most of the electrical parts can cause the misfire, leads, dizzy, rotor arm, ciol pack etc
Cleaning the plugs, i say wouldnt do much tbh. Try spraying some WD40 around, will expel any moisture.
Does it happen all the time? Underload?
Check the gaps in the plugs. Check for any cracks in the dizzy cap.
yeh i will check em n c if they r ok n c wot happens. thanks
-
Why would it be fuel cut?
He gets past the stutter and its fine.
I would say its a misfire of some sort. Try checking your plugs and leads mate
ive checked the plugs and cleaned em. they were ok n one of the leads had a rip on top so i changed it. i fink its had some water get into it.
-
Next month mate
il be coming too.
-
fuel cut maybe
what mods do you have
i got a fuel cut defender fitted. its runnin 0.8 bar. ive got it decatted wi a full stainless steel exhaust. ive got a hks actuator. its got an air filter n ive fitted a fuel pressure regulator.
-
need some help. when i put my foot down car seems to rev ok until it hits bout 2800-3000rpm then it starts to stutter and lose power and then it hits bout 4500 rpm and starts pullin fine. boost pipes seem fine. duno if its a fueling problem. can anyone help?
-
We will be coming down the m6 if that helps
wens this happenin?
-
Wher is evryone
thort it starts at 1
-
Yeah it is dude. 1pm behind Krispy Kremes
sound. il defo be there. might bring ma mate wi me and his civic h22 conversion
-
Nah, it's not big enough to do that!
is this meet happenin this sunday?
-
1. Dan Evans - rollers
2. Dale10ellis10
3. Liam D - rollers
4. Kennedy
5. LukeSR
6. Russleh - rollers
7. Gary_ep91 - rollers - PAID
8. thorpy
9. matt glanza-rollers.
10. ben v
11. Gtr-r33
12. Enzo
13. rob_bower (if i can get it off!!)
14. DavidAshton - rollers
15. Aaronw
16. craig - rollers
17. Craig_N - rollers
18. Dean-JDM-ep*1
19. cheshireglanza-rollers
20. Bretts-rollers
21. Markoos - rollers
22. luke robs
23 .lukEp - rollers PAID
24. BAZ2CRAZY - rollers
25. Idrees - Rollers
26. Rob + a couple of others
27.CRAIG SR
28. ep82_girl
29. brewin
30. pc18/bean rollers if it fits lol
31. Amjad - Dyno
32. Chanelle1234 - rollers?????
33. Socks
34. Seab - Rollers (better put the engine back in lol).
35. Steve GT (Rollers)
36.Starlet786 (if car is ready)
37. Giggz (if not working)
38. nutnut (if i get a new turbo in time)
39. daveEP82
40. blitz
41. kyran
42. starlet-glanza-v - rollers maybe!
42. Shaneyb
43. Wilco
44. glanzagee (rollers)
45. Ro55ifumi (John)
46) batmanglanza - rollerz
-
1) Craig_N
2) lukerobz
3) lukEp
4) Asad
5) Bluebear
6)Shib786
7)redz11
Wilco
9)Cheshireglanza
10) Markoos
11)Rickstar
12)Lukerobz
13) batmanglanza
dont worry luke i will put your name down
-
no doubt ill make an apearance
mite kum dwn wi manchester lot
GLANZA V BIG SPEC 308BHP
in Cars For Sale
Posted
Is this still available