Wills21

Halfords sell them

Absolutely love this little car, nice job man

Got sorted today, this can be locked

Would anyone know where I'd get the part number for the long bolt on the lsd rear mount?

Or even if someone could pm me thier chassis number if their car came with a factory fitted lsd box so I could get one from Toyota that would be great

Thanks

Getting the lsd box and td04 fitted at the minute

http://s907.photobucket.com/user/willjpg/media/20130713_150049_zps369fa8b5.jpg.html'>

http://s907.photobucket.com/user/willjpg/media/20130713_161124_zpsc1fa52d4.jpg.html'>

Also picked these up

http://s907.photobucket.com/user/willjpg/media/20130715_160009_zps33fc15de.jpg.html'>

http://s907.photobucket.com/user/willjpg/media/20130715_160030_zpse45523ba.jpg.html'>

Would be interesting to know, perhaps there design has changed over time, while its off and your waiting for a new rad you could always have an ewg flange put on, brace it and decat, and heat wrap it.

Would it be worth it if I'm only running 1bar? What benefits would I get running a ewg?

I've recaro fishnets, always fancied a set of evo 7 recaros though, lovely seat

Cheers for your help lads, I'll take pictures when I'm fitting it all and post them up

From the thread I've just read on tgtt the owner of the forum said he'd seen two with standard rad, and they were so close that the engine movement brought it forward enough to pop the rads in both cases so simple answer is no...

This is toyosports your talking about?

I only ordered the mani and downpipe yesterday so I'll check when they arrive, just thought I'd ask you guys first

Damn, I'm waiting on a half rad from a group buy thats taking ages, suppose I'll just have to wait

Will it fit with a standard rad?

Thanks lads

Link to where you got spacers from mate!

Got them in my local motor factors man

This is how its sitting at the minute, fitted 10mm spacers on the back with extended studs, car is going in to get the clutch and gearbox fitted in the next week or two hopefully, four tyres aswell, not 100% what tyres yet

Picked up a td04 aswell

oh i need them on the front, ah got them from barry`s motorsport cork, 40euro for the 4 of them, so the studs you gave me the link to they will do the trick yea?

I'm 90% sure, not 100% sure the spline count on the inside is the same though as I got different one's. Ring them to make sure maybe

That was a good price for the spacers, I paid €30 for two lol

thanks for the link bud at least i can use them now,, did you use 10mm spacers on front aswell??

No just the rears mate, didn't need them on the front. Where did you get your spacers?

I rang the guy and he couldnt of been more helpful, apoligised about it, said the lad that took it off the car didnt know what he was at and took it off too but I'll have it first thing in the morning

Thanks for the offer TurboTobz

http://www.grp4fabrications.com/product_info.php?cPath=46&products_id=590

I got them in Icetronix because I needed them fast, they're 25mm longer than standard (whatever that is)

Back studs I had to take the discs off to get the new studs in because they are too long

I only done this the other day, needed longer wheel studs

10mm makes a good difference on the back

Bought a td04 from a dismantlers on Monday and received it this morning by courier, it has no clamp holding it together though?

Heres a pic, do I need to get back onto him or can I get a clamp somewhere handy? Thanks

Can you free any of them?

Just realised I posted this in the wrong section, could a mod move it please

I'm just copying and pasting this from tocirl so some of it may not make sense lol

Some of you may know I bought this off a mate a while back after he bent the back axle. I had that sorted fairly quick and put it up for sale, my civic sold before the glanza so I decided to keep it

This is a picture of it when I got it off him



Some pictures I took for the for sale add :roll:
















I've gotten rid of them wheels since and bought these of Sham, they are in the middle of getting painted at the minute, should have them on the car in the next day or two 040 white









The paint is very dead on the car so I've bought meself an early Christmas present of a Kestral complete polishing kit from Cleancar.ie (thanks guys). My girlfriend got me a trd leather gearknob and d1 extended lug nuts, also going to get pressed plates tomorrow.

I'll have updates in the next few days all going well

Got the wheels finished yesterday, leaving them over the weekend to harden and getting tyres fitted on Monday

Got the wheels on this morning

Fitted a Apexi N1 cat-back system today



Then gave the car a badly needed wash, start them young!

Got the car clay barred today and tested a section on the roof with the buffer, going to do the rest tomorrow

Just finished buffing the car, need to put some coats of wax on tomorrow, got some quick pics, very hard to capture how much of a difference there is in a picture, it's looks great, also fitted some metal plates

Browner just dropped these off, picking the rest up later in the week

Got the seats fitted and browner just dropped off some original grey mats (seats and mats need a wash)

De-wipered the rear yesterday

Browner dropped this off earlier, oem lsd box with shorter shaft and rear mount

Ordered this at 12.30 in the afternoon yesterday from camskill and it arrived this morning at 9am :shock: great service

Its an exedy organic clutch, rated to 40% above oem so it should handle the td04 ok

This mornings purchases, 3 point rear brace with all plastics and a fmic kit

Picked this up off RobEP91 on Saturday, waiting until I fit the front mount to fit it

Trying to get a good reflection pic earlier on, very hard with a white car

Only doing this I realised how many times I said "Browner just dropped this off" haha

I'm looking for a front oem lip now, rear mid spoiler and maybe a livesport spoiler and then td04

Pm'd