glanza.jack

try posting this on ycuk dude

thanks

Hi not sure if i should be posting this here.

My friends yaris 1.5 tsport has recently started to knock under low revs because he let the oil get too low. Im guessing this is the bottom end that has broken? Does anyone have any idea of how much it would cost to fix roughly?

Thanks

well i think munday sold it to my friend because someone had crashed into him and he couldnt afford to have it fixed up so then my friend fixed it sold it to me and then i went onto crash it and now i have some of the parts off it on this one, long story haha!

62,000 miles!

Thought i might aswell start a thread here.

I bought my nearly standard glanza from an import centre near salisbury over a month ago now, here she is!

Uploaded with ImageShack.us

Only mod it had was a Recaro Bucket!?

I had few parts left over from my first starlet which i had fitted to my new glanza at the import centre, spec list:

Taken off my first starlet:

Tein Super Street Coilovers

Wrc IMPUL Wheels

Prada Spec 2 tyres

HKS Hi Power Exhaust

Gutted Cat

Magnecor Competition Igntion Leads

With all the bits fitted and a quick wash

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Lost the rear window sticker, wasn't too keen on it!

I then went on to strip the back out and fitted my Cusco 5 point rear half cage, Cusco C-pillar bar and Cusco front and rear strut.

Uploaded with ImageShack.us

I sprayed a couple of bits on the engine bay to add a bit of colour and added the few blue pipes i own!

Uploaded with ImageShack.us

Uploaded with ImageShack.us

My mate gave me his pink petrol flap off his old Glanza which has been broken, not sure about it though.. any thoughts?

Uploaded with ImageShack.us

Still to go on is my Cusco lower arm bar and Cusco adjustable panhard rod, try get this done soonish but waiting on a new abs pump. No brakes, which is not cool!

Uploaded with ImageShack.us

Dan Pat, she is hottt!

1)Mark(the-dalester)

2)craig_N

3)LukeSR

4)Cheshireglanza

5)Asad_EP5DR

6) Steve GT

7) lukEp

8)shorty +1

9) John (Ro55ifumi) -Paid

10) Matt (Socks) + 2 mates

11) Enzo + track time!

12) starlet-glanza-v

13) chanelle1234

14) kingcarr

15) Idrees + Track Time

16) Scott (Gtr-r33

17) ollie ryan

18) CRAIG-SR

19) redz11

20) nutnut

21) Gary _EP91 + Track Time

22) Blitz

23) Kyran

24) durmz

25) KrissyB + Track Time

26) nastyrash

27) mystrey guest!!

28) Dean-JDM-ep*1

29) lukerobz

30) Liam_D

31) Knightsy-EP91 +1

32) Galliano +1 (PASEO)

33) matt_27 + track time if avalible

34) BAZ2CRAZY + Track time

35) Crossfade and Stacey

36) ryan and tommy the toyota,

37) Ryan5793+2

38) ollie454+1

39) Amjad

40) GlanzaGee + track time (intermed)

41) glanza.jack

thanks for info!

ok just got the caliper off and when the brake pedal was pushed the caliper doesnt move but i can easily move it by hand...? does this mean the piston has broken?

Thank you for everyones help, i will go give it a try now!

How did you fix the sheared bolt?

The rust will be thick scale, I scrape it off with a chisel normally (or blast them, protecting the threads and sliders ).

Only half the threads were missing so i used a helicoil kit to rethread inside of the caliper then used a slightly bigger bolt, worked perfect!

Are all the bolts tight, and not sheared? Ie could the caliper be moving?

I had a guy turn up for me to look at upgrading his brakes and one of the front carriers had a stripped bolt!

Other than that the classic one is sticky sliders, and rust buildup under the pad retaining clips.

Well one of my bolts had sheared the thread off but i fixed that problem so it was kinda lucky my brakes did jam. Could it be a good idea to check for rust and wire brush it if there is?

probably a corroded piston, i had the same problem on the same side lol

Will i be needing a new caliper?

Driving home last night and a deer ran out in front of me so i hit the brakes fairly hard and from then on the front left caliper has been getting stuck on.

I have taken the caliper off and looked at the pads and that but im no mechanic so couldnt work out the problem.

Any ideas????

First glanza i bought on 81k and in two months i put it up to 88k, the excitement of having boost i couldnt stop driving!

My glanza now i bought on 61k and only put about 1500 on it so not too bad, i managing to hold off a bit

Just plumbed in my boost gauge but want to wire up the light.

whats the best way to do it, on my old car is was wired into my lights so when i switched them on it was turned on or i have been told to wire it onto the ignition cable?? im useless at electircs so dont know what wire to be looking for.. are they an obvious colour?

Whats best or if anyone has better ideas....

haha same here, thanks for your help anywyay dude

Well theres that checked of the list then lol... Maybe it isn't wired up correctly to the speaker?

i did think maybe the wiring wasn't right somewhere but then why would it beep and flash?? i wondered if i should have the sensors on the a pillars? maybe they have been taken off for some reason and thats why it doesnt trigger it off.

Have you got an actual speaker in the engine for the alarm? I can't think of the work

yeah i even got my friend to check that it was the speaker thing in the engine that beeped and it is.

Still no luck with it! If i set it too the max i can get out of the car and gently touch the car and the box will flash knowing im close but still no alarm! it even beats when its swtched on so i know its makes a noise..

ok i dont need the car running when i turn it on or anything like that do i? i will go try now

thanks

Maybe it isnt setup right because i have switched it on and then locked the car and rocked it from side to side but nothing... it will probly go off one day and suprise me!

Alright guys. I have this black box with flashy lights on it it, which then leads into a larger black box behind dash then up to another box on top of my dash. I has loads of on/off switches and lights but no idea what is does??

Also says something about shock sensor?

Im guessing its like an engine immobilizer..

Any ideas? or even how it works...

Uploaded with ImageShack.us

Cheers bud!

Not sure if im in the right section here?

Where can i buy sealer for my car? I am planning on fitting a roll cage and want to seal drilled holes..

I have done it a few too many times! No I live near shepton and frome, in a small village. I take it your from weston...