Guard1an

where did you get these projectors? any link available?

http://www.toyotagtturbo.com/forums/showthread.php?28380-ABS-Diagnostic&p=350165&viewfull=1#post350165

Better quality this time

I sent you pm on TGTT.com mate before writing this post

Hello,

does any one have available brake proportioning valve and willing to post to Greece?

Good build, like what you did with the rear wiper

Also interest in this! Tell us details.

I saw that one. The only problem is that the bolts on the top mounts are reversed on the N/a.

I sadly discovered this after buy a Glanza 3 point strut.

You can rotate the brackets the opposite way so problem solved

I believe Greddy one requires no trimming, not sure if it fits UK N/A model.

Bayside Blue is my favorite

Your inbox is full mate

No no no...

you are missing something, the total width of the bush and the mounting position.

Oem and powerflex bushes are both 60mm in width so if you want to turn the bush down to fit in the ring you must also grind the sides of the ring about 3mm to fit the bush correctly into the mounting position.

To fit mine i took measurements from old bush, took the ring out, made two new rings and weld them in the axle and now is perfect. Here are some photos to show you:

http://www.ukstarletclub.com/forums/index.php?showtopic=49151

/>http://board.tercelonline.com/viewthread.php?tid=39844

Not a perfect fit to EP91 beam, they are designed for EP82 beam.

Check the second link to see the differences between two beams.

Nothing important, they want photos from installation but i didn't fitted mine yet.

They also said that they are not listed this product for Glanza, only for GT but there is only one section on their website for both cars!

/>http://www.powerflex.co.uk/products/Starlet+Turbo+EP82+%26+EP91-2614/1.html

If i have some time this weekend i will send them photos, along with better description of the problem.

Any feedback for these?

Awesome car dude.

The Glanza BBQ at the 4th photo is yours?

I believe these bushes are designed for ER82 axle, where the housing is like a tube, if you get what i mean.

If you read the link i posted, one guy said that it will fit in EP91 but it will become loose a couple of millimeters.

It's why the bush is split at half and the housing in EP91 is very small instead of EP82.

Got them fitted, it was just me being a tube, ive got a set of tmd bushes too, ended up fitting them instead of the powerflex.

The TMD bushes are smaller in diameter than the Powerflex ones?

I have same problem and found this.

There is a difference between the GT and Glanza axles in the bush housing.

I already contacted Powerflex about this.

These are only found on automatic model, iirc one is MANU and the other says POWER.

They alter the rpm limit for gear change.

thats mint luke! shame my passenger motor isnt work on my mirror

I've seen a tut somewhere to fix none folding mirrors on the glanza

http://hadjigeorgiou.com/blog/?p=376

Admins please add Tapatalk plugin.