Jump to content

kdowg

Member
  • Content Count

    63
  • Joined

  • Last visited

Everything posted by kdowg

  1. ahhh do they i looked there before and cudnt find them ill have another look now cheers matey
  2. they ok and tht like matey? aye off a 4efte glanza engine i think there is slight differances from the gt and the glanza. i did buy sum off here but the new gingeon pin just rattled about inside the conrod and wasnt tight enough so im thinking the coonrods sum be wrong (i cud be wrong tho) and help with this would be appreciated cheers dan
  3. was just wondering if any one knows where i can buy a conrod from cheers
  4. oem piston bought from cam skills and the rod is off a lad off here but there is too much play in the pin and rod wen assembled and pin simply falls out it has to be the wrong rod. thts y i was wondering of the dimensions of the glanza rod to so check it and find out if it thw wrong one cheers dan
  5. i recently took the piston out of my engine as the ring land decided to give up. once i had the piston out i tried to remove the gudgeon pin from the piston but its completely stuck tried every thing. so i went and bought a conrod and went to fit my new piston and conrod together but the pin isnt tight on the rod and simply will fall out. so i was just wondering if any one had this problem before and can any one tell me the dimensions of a glanza conrod to see if i have the correct rod. ideally the overall length and the little end bore size cheers dan
  6. mine done this when i had the shaft out and just ordered a new drive shaft seal and replaced it was only like a tenner or sumit from toyota
  7. iamlegend for me like and tht is a very sexy blue glanza beside it hehe
  8. any one kno any good products to remove oil from driveways i kno i wont get it all up but need sumit to clean and make it fade to stop the auld girl from moaning haha cheers dan
  9. i have this problem between 3/4k and its still on a standard ecu bin like it since i bought the car last june driving me mad now like just fed up with it if im honest I've changed everything over and still noo joy. any of you lot find a cure will let me know so i can try it on my car cheers dan
  10. ahhh cheers mate that would be a great help like all i want to do is swap mine over take it out and see if its the ecu thats causing the problem if not then im back to the drawing board lol when u free like matey ? cheers dan
  11. not sure if this is in the right section but here it goes im having a problem with me car misfiring between 3/4k on the rev range, I've been asking people about it and afew have maybe a ecu fault so was just wondering if there is any one in this area tht i can borrow there ecu for like 5 mins while i check if it is the ecu and rule tht if the fault is still there. I've changed the whole ignition system and im seriously sick of spending money on parts and not solving the problem cheers dan
  12. anyone ever had a problem with this as I've just put mine on and it popped off when i gave me car a little bit of a play :S
  13. http://www.toyotagtturbo.com/forums/showth...ght=inlet+pipes there this explains all the pipe and tht plug looks like the knock sensor just under the inlet to me u got the map sensor and tht pluged up ??
  14. cheers mate il do one tomorra seee if it throws anything up if it dont im stuck i dunno wa it is :S
  15. its still got a top mount on it and I've checked its not earthing on anything I've changed the whole ingition system and no luck. hmmm wud be handy if i could get hold of ecu just to try it out and see if it is tht im starting to get fed up with buying parts to find out its not tht costing me a fortune nah i havent done a diagnostics as the ecu light isnt coming on or anything to throw up any problems
  16. rite I've just changed my engine over as the last one wosnt running so smooth and just didnt seem healthy at at. it also misfired between 3000/4000 revs. so i changed the engine over but i took the the inlet, injectors off the old engine to pput on the new engine and the strange misfire is still there only between 3000/4000 revs on a whole tho this engine is in a much better condition and runnin sound apart from this strange bit. now im starting to thing it must be a fueling problem (as i had already changed all of the ignition side on the other engine) just wondering if any of u guys know w
  17. hello i feel daft asking this as i should have taken more attention when taken them off but i have forgotten what goes on these the pipe at the top in the middle what goes on here what pipe goes on the pipe that runs from the pump to the thermo stat housing :S and am i rite in thinkin the breathers that run from the steering rack up towards the inlet connect on to these bits any help to solve this will be a great help cheers dan
  18. ahh sound man this mean yah dont need to take the wheels off or owt thort i read ages ago about clips holding the shaft into the box :S cheers for yah help matey just hoping all goes to plan off topic but is there anything else i need to look out for or tips when removing the engine? cheers dan
  19. orite there im changing a engine over on me glanza tomorra and never done it on a glanza before and I've heard the shafts can be tricky to get out the gearbox just won dering if there are any tips to get them out I've never looked at the shafts or anything so new to working on glanzas any help will be greatly appreciated cheers dan
  20. kdowg

    engine clean up

    thort id show sum more pics of wa I've managed to do today
  21. kdowg

    engine clean up

    bought a engine at the weekend and thort id giv it a clean and a paint before i dropped it into the car so made a start to day so thort id show yah sum pics of it so far before after I've painted the block black and was goin to paint the head silver but i dunno what paint to use i think spraying it will look better so was wondering what people have used in the past cheers dan
  22. has anyone in the teesside area got a engine stand i could borrow for a few weeks while i strip my engine and give it a good clean and a paint up ;) cheers dan
  23. i thort it was sumit like tht but wosnt sure im thinkin tie wraps cud be easier haha cheers lads
×
×
  • Create New...