malanga31

hi guys, I have a prob with the launch control, if I put some degrees off on timing... the car just shutdown :/

heres a video:

https://youtu.be/WccjYrx2ATk

Anyone can help?

It's a 4efte from a ep82 .... I used the boomslag arnees....

Thanks!

hi guys, I have a prob with the launch control, if I put some degrees off on timing... the car just shutdown :/

heres a video:

https://youtu.be/WccjYrx2ATk

Anyone can help?

It's a 4efte from a ep82 .... I used the boomslag arnees....

Thanks!

Hi Friends!!! What is he maximum temperature supporting the EGT 4EFTE engines? fully forged! Interestingly Sock's project, 400bhp is incredible. I currently have a project with similar specs and are my maximum EGT of 1400F to 1.68bar boost. Use spark Grade 7 and the last dyna test gave 316bhp..

Changed sparks same thing

OK, I will change them to, Will NGK grade 7 with a .22 gapped will work fine? I'm boosting 1bar.... stock internals.....
Here's a video , I know is not the point... but.... hehe

>http://www.youtube.com/watch?v=4JLZoZ2Rm2U

Well I set it to 10 regress... Same thing.... Any other thing? If I rev it to 2000rpm it start to go 1800 - 2000 and afr start 14.7 16.0 ....

Was gonna say timing too...Might be retarded abit much? tried advancing it slightly?

I tried the order day with the EMU just put -5 all around 500 - 1500 rpms, but did not help at all.... I will try it mechanically....

Timing?

12 degress , at the EMU I can see it 10 - 17....

Hi guys!!

I have a strange problem @ idle with my engine.

AFR it's 14.7 - 15.0 and rpm 800 -1000.

The problem is that the exhaust starts popping when warm..... but if turns on the lights or the A/C it almost stop doing it.

Here;s a video:

>http://www.youtube.com/watch?v=MKMAjtCJ-As

I changed coil, leads, cap, rotor.....

Thanks!

Nice!!!

Hi guys!

I just bought a new turbo from subaru wrx it's a TD04L.

Have a problem with it, I just installed it, but it's smoking....

I'm using motul 5w40 100% synthetic.

He only smoke with the turbo is on full boost, or when I'n under compression....

I do not know, if can be the oil restrictor? suppose has to be a M10x1.5, but I done really know..

Maybe you guys can help me, Thanks!