![](https://www.ukstarletowners.com/uploads/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
zebedee
-
Content Count
240 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by zebedee
-
-
-
-
I think you could buy a cheap V use what you need break the rest for parts and it would cost that much when it's all been done and the spare parts sold
-
it's not just ebay bud even lads would buy 100 sets off the crap stuff and flog them for same price as the real ones.. ebay was just an example of were to pic up the fake shit
Yeah must admit i've seen it at the shows too saan the fake bride seats for sale at the last Japshow
Maybe we should start a thread with all the fake parts we know of where we have seen them and how to tell if they are fake?
-
cheers zebedee. post edited.
No worries hope it helps your sales
Seen a lot of Apexi exhausts rot just there think as they sit at and angle upwards the water collects just there and rots them from the inside out
-
If it's on ebay and it's cheap it's usually fake these days
-
Front i take it?
-
The exhaust is an Apexi and the that head unit is a carrozzeria which is the Japanese name for pioneer.
-
-
-
There is one on ebay
-
-
Item Condition:
Very good was painted recently only has a small mark around the exhaust which you can't see when it is fitted just when you turn the bumper upside down. Has one small crack in the corned near where it bolts to the boot. This has been like that since i got the bumper 18 months ago.
This is a genuine plastic lip not a fiberglass copy.
Price & Conditions:
£120 + fees and delivery
Item Description:
Glanza rear bumper with optinal lip recently painted
Pictures:
Location:
Lincolnsire
Contact Details:
pm or post below
Postage & Packaging / Delivery:
There is the possibility of also meeting up depending on location as i travel about quite a bit with work.
Courier price varies depending on location:
Zone 1 (Next Working Day)
 
Covers most of mainland UK £25
Zone 2 (2 - 3 working days)
 
Remote Scotland £30
Zone 3 (3 - 5 working days)
 
UK off-shore islands, including the Channel Islands and the Isle of Man £65
NI & Éire (3 - 5 working days)
 
Northern Ireland and the Republic of Ireland £40
-
Item Condition:
Brand new never been painted or fitted
Price & Conditions:
£100 + fees and delivery
Item Description:
Replica liversports rear spoiler
Pictures:
What it would look like painted and fitted
Location:
Lincolnshire
Contact Details:
Please post below or pm me
Postage & Packaging / Delivery:
There is the possibility of also meeting up depending on location as i travel about quite a bit with work.
Courier price varies depending on location:
Zone 1 (Next Working Day)
 
Covers most of mainland UK £15
Zone 2 (2 - 3 working days)
 
Remote Scotland £25
Zone 3 (3 - 5 working days)
 
UK off-shore islands, including the Channel Islands and the Isle of Man £60
NI & Éire (3 - 5 working days)
 
Northern Ireland and the Republic of Ireland £30
-
Item Condition:
Used they have got some small cracks and the edge on the inside needs tidying up plese see the pictures.
Price & Conditions:
£100 + fees and delivery
Item Description:
Genuine varis side skirts
Pictures:
And what they will look like once fitted
Location:
Lincolnshire
Contact Details:
Please pm or post below
Postage & Packaging / Delivery:
There is the possibility of also meeting up depending on location as i travel about quite a bit with work.
Courier price varies depending on location:
Zone 1 (Next Working Day)
 
Covers most of mainland UK £15
Zone 2 (2 - 3 working days)
 
Remote Scotland £25
Zone 3 (3 - 5 working days)
 
UK off-shore islands, including the Channel Islands and the Isle of Man £60
NI & Éire (3 - 5 working days)
 
Northern Ireland and the Republic of Ireland £30
Please note these will also be listed on ebay this weekend.
-
I would take some lower arm front bushes and rear axle beam bushes for an EP91.
-
I should have an ignition barrel light availble soon where in Lincs are you?
-
You'll be looking at custom built adapters for that as i was going to do it.
All the ones you will find listed are for cars with bolts not studs like the vag stuff which is all bolt.
Best way i could think to do it was use one long stud that would go from the hub through the adapter and pick up one hole in the wheel then do the other with the adapter but you might have to cut your studs short due to them hitting the back of the wheel and then use bolts for the other 4 holes holding the wheel on due to room on the adapter between the new studs and the recesses for the nuts to hold the adapter to the hub.
Most companys want to work with atleast 20mm think adapters
-
check my 1st post on page one mate im going to be running a Greddy TD05 16g on a custom manifold etc and race spec engine towards end of the year ;). got to say tho the ct9 performs really well
Ah nice one mate, didn't think you would be sticking with the CT9.
Will have to call in with Rob for a brew, see what he's building for you and give him a kick about a baffled sump he was going to sort out for me
-
Nice work mate, you sticking with a ct9 based turbo then?
-
A 215 is 20mm wider than a 195 so would be 10mm further out than a 195 so it's going to be tight, what about a 215/40 on the front and a 195/45 on the back they would work out at the same overall diamter pretty much.
-
swap my nur backbox for you spec2.. tube?
.
What starlet do you have 91 or 82?
-
I'm on 16x7 et28 and with a 195/45 i've had to have the rear arches rolled to get clearence fronts were ok on the stock wings i'm now using cruise wings and plan to space the front a bit futher out.
-
Replica liversports rear spoiler EP91 new
in Starlet Parts For Sale
Posted
Bump