
Tommyk
Member-
Content Count
255 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Tommyk
-
Yh it's bleed up fine and it's had 3 different water pumps obv with the 3 engines so not tht. I wondered if a bad map could cause this and unless it's a faulty rad
-
Yea kicks in fine mate and on idle and normal driving it fine and even fine when just blit it about it a when I give it some hammering throught the gears up to speed it happens
-
Hi guys basically since my car was mapped at td and had a new triple core half rad I've had heating issues. It's not down to the engine as this is the third engine it's happened on now. Basically if I give it some thrashing temp gauge goes rite up and heaters go cold and then heaters come warm again and it goes back down. Also spits water out the cap or somewhere but I've put a new high pressure cap on and all bleed up perfect but still no difference any ideas?
-
Hi guys basically since my car was mapped at td and had a new triple core half rad I've had heating issues. It's not down to the engine as this is the third engine it's happened on now. Basically if I give it some thrashing temp gauge goes rite up and heaters go cold and then heaters come warm again and it goes back down. Also spits water out the cap or somewhere but I've put a new high pressure cap on and all bleed up perfect but still no difference any ideas?
-
I had same problem mate and I had left a earth loose on my inlet mani haha. Did it all the time tho not just in day time but sounds like a earth to me mate apart from only does it in day time
-
Hi guys am I rite in saying that the e manage ultimate has anti lag and launch control built in?
-
Wanted 5e as can run bigger turbo but with same lag I'd have from a 4e so more power more torque and same lag
-
Ahh won't matter which I get then mate as will be putting forged rods and pistons in
-
Do I want 5efte forge rods then or are they just 5efe? Thanks for help guys
-
320752516672 according to this on eBay I can use my origional scat rods from 4efte to build my 5e ?
-
Ahh ok mate thanks for that take it I do need clutch too
-
Looking for a 5e crank clutch and flywheel and anything else I need to turn my 4e into a 5e
-
Sorted it thanks was bad earth
-
As above my battery light and abs light keep coming on for some reason. Battery is never flat and when it sometimes comes on my lights are more dim than usual. Is this a bad earth? Any help would be appriciated thanks
-
I have some trd coilovers. Shocks are fine and have new locking rings so not seized but top mounts are knocking
-
Wanting to swap my j performance back box for a straight cut tip back box. Mine is a 4 inch slash cut. Only about 2000 miles old. Anyone?????
-
I must have been mis lead then but was told they cost about 1800 quid so thought they were expensive. Il flog um for 50 quid or summert then
-
Shocks and springs and rings are fine mate just top mounts so shurely must still be worth something as trd are very rare and expensive
-
Hi guys looking to swap my trd coilovers for another set. Only have fronts and backs had it. Front ones are fine apart from top mounts bit knocky. I believe cusco ones for. Very expensive coilys. Have had new rings fitted so not seized
-
Just seeing what I get offered mate. Inbox me people or my number is 07983405943