Danz_ep95 Posted April 27, 2016 Share Posted April 27, 2016 Hi guys who is running uprated cams I've got a few sets on 5efhe cams what are they like on small turbo setups and what about billet cams ECt I heard they are very lazy off boost Quote Link to post Share on other sites
5e colin Posted April 27, 2016 Share Posted April 27, 2016 depends on the degree of cam you get cams means higher rpm limit meaning stock 4efte mani has to go as its a top end killer 5efhe cams suck on a ct9 as the turbo chockes before the cam really works top end Quote Link to post Share on other sites
Danz_ep95 Posted April 27, 2016 Author Share Posted April 27, 2016 depends on the degree of cam you get cams means higher rpm limit meaning stock 4efte mani has to go as its a top end killer U think they won't be any good on a custom ct9 hybrid with a externally gated manifold 5efhe cams suck on a ct9 as the turbo chockes before the cam really works top end Quote Link to post Share on other sites
5e colin Posted April 27, 2016 Share Posted April 27, 2016 you will get smal gain the 5efhe cams only really start working 6k plus then ct9 starts dropping of already on a td04 better gains to the limiter Quote Link to post Share on other sites
Danz_ep95 Posted April 27, 2016 Author Share Posted April 27, 2016 you will get smal gain the 5efhe cams only really start working 6k plus then ct9 starts dropping of already on a td04 better gains to the limiterI see will see how it goes as my brother is putting some 5e cams in his 5e forged motor see what he gets out of them with his ct9 hybrid setup ... Also what are the billet cams like such as Cruise and speedvison like Quote Link to post Share on other sites
5e colin Posted April 27, 2016 Share Posted April 27, 2016 (edited) the speedvision 1s they have up are 270 degree in and 280 degree out thats race spec and will give horrid idle but work a treat at 8000rpm ct9 is to smal for a 5e minimum td04 i would say as the ct9 is to hot and will chocke to death top end but lots of torque in low rpm Edited April 27, 2016 by 5e colin Quote Link to post Share on other sites
Danz_ep95 Posted April 27, 2016 Author Share Posted April 27, 2016 the speedvision 1s they have up are 270 degree in and 280 degree out thats race spec and will give horrid idle but work a treat at 8000rpm ct9 is to smal for a 5e minimum td04 i would say as the ct9 is to hot and will chocke to death top end but lots of torque in low rpm Yh I understand what u mean I love the sound of the cruise and speedvision cams sound ace Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.