*** Gauging Interest - Full Weld In FIA Approved Roll Caged EP82 Shell - ***

[Toby@ToyTuning.com]

Hi all,

Our Full weld in roll cage was recently completed so we will be selling the complete shell with cage as one unit. Whoever buys will need to supply a set of wheels and shock absorbers/springs to ensure she is a rolling chassis, we can leave the coilovers on there but they will need to be returned.

Current spec is:

Clean Shell with Full Professionally Welded Multipoint Roll Cage in CDS

Double Door Bars

Front Strut Triangulation Bars

Dash Bar

6 x Floor Points

Rear Diagonal

Rear Cross Members

Harness Bar

Foot Plates

+ more

Fully FIA approved for Motorsport

All designed and made by the UK's leading roll cage fabricator.

The car will also have:

Lower Arms

Track Rods/Ball Joints

Stock Fuel Tank

Rear Brakes

Front/Rear Hubs

New Handbrake Cables

We paid £2250.00 for the roll cage for materials and labour all in.

We will be looking for £1750.00 for the car as it is. You can sell off the remaining parts and make back near £500.00, so all in the shell with cage would cost roughly £1750.00 which is near half what it costs to get your Starlet to this spec, and thats not including having a clean shell in the first place.

If anyone is serious about having a base car of this standard then please get in contact with us.

Thanks,

Toby

Pictures (we will update the thread with the latest pictures asap as these are a few months old and the cage has been re-worked to some detail since):

[Toby@ToyTuning.com]

Open to sensible offers on this.

Thanks,

Toby

[Toby@ToyTuning.com]

Reduced to £1750.00 to clear.

Many thanks,

Toby