Squeak-Glanza Posted December 23, 2008 Share Posted December 23, 2008 The problem all started last week, i went to start my car and it wouldnt start & the engine light was coming on so i had a look and thot it might of been the plugs getting wet as one was rusty and i dont have a top mount now so thought water was getting in the vent.I got new plugs and fitted them, the problem went away well so i thought went for a drive everything was ok until i booted it then the engine light came on again and it started popn & banging.When i got home i tested what codes were making the engine light come on and its telling me codes 31 & 34.Can any one help me out with what could be causing this. Quote Link to post Share on other sites
Asad Posted December 23, 2008 Share Posted December 23, 2008 codes suggest a sensor?http://www.ukstarletclub.com/forums/index.php?showtopic=9295fuel cut? what are you boosting? Quote Link to post Share on other sites
StarletRick Posted December 23, 2008 Share Posted December 23, 2008 still isnt dry in there mate. took me frigging ages to get all the water out when mine got wet. when the engine is hot, turn it off and pull the plug leads. it lets it evaporate out. took me about 3 or 4 goes to get it totally dry. make sure no water is up in the leads either. Quote Link to post Share on other sites
Squeak-Glanza Posted December 23, 2008 Author Share Posted December 23, 2008 cheers ill try drying the plugs out as soon as i can then. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.