Jump to content

Recommended Posts

Hi Guys,

Couple of questions..

what it is as far as i am aware nothing has been change on my turbo apart from the EBC n a dump valve..but my boost level goes up to 0.93 bar on the EBC (i need to get a decent boost guage :lol: ) i have hit fuel cut and have had the engine managment light come on :(

What i was wondering..

  1. does an actuator limit boost? as i take a boost controller can't?
  2. If it does and i get 1 are they hard to fit?
  3. Are they hard to setup?
  4. if i set the actuator to say 0.85 and the EBC to 0.9 would the actuator over ride the EBC and boost would only reach 0.85?
  5. and lastly, is there a specific one for the CT9 that i should look for/get?

Thanks in advance guys :p

Link to post
Share on other sites

that's what the HKS actuator does it sets the boost to one level and one level only- e.g. 0.6 the boost can not raise any higher then that (unless you use the ebc) as that is what the actuator is set at.

the only way boost rises is boost creep (nothing to do with the actuator)

or an ebc with raises the boost level electronically but cant go lower then the HKS boost level as the actuator sets the 'original' boost level

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...