nerosis Posted March 6, 2009 Share Posted March 6, 2009 Fitted my blitz Bov and it works.But there is 2 holes left from where the old BOV was (the standard 1)What do i do with these holes? because im guessing since the BOv works fine, that i didnt do any thing wrong.Can i cork up these holes? or do i need to get a small filter thing?help please. Quote Link to post Share on other sites
jam-ep Posted March 6, 2009 Share Posted March 6, 2009 If you are using the standard EFI pipe yeh block the hole up where the standard BOV sat ( i used an old socket wrench rubber handle cut down worked a treat), and for the pipe that comes out of the rocker cover just place a breather filter on the top or oil catch tank, cant remeber if its 12mm hose you will need. Quote Link to post Share on other sites
Sparky Posted March 9, 2009 Share Posted March 9, 2009 I seen that someone put a 2 pence piece in the EFI pipe to block it at a meet yesterday!As said you would need a oil breather filter or oil catch can for the top of the engine, I was recommended a 9mm one, not fitted it yet though so cant confirm. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.