Jump to content

Recommended Posts

What hoses do you's use on this ?Because the hoses on mine are shite and am not boosting atall because there bent in half because there so soft.,when a put the foot down you can hear lots of air coming out everywhere so think its my hoses.Also not dumping because of this.Any pics or that would be good.Cheers

Link to post
Share on other sites
What hoses do you's use on this ?Because the hoses on mine are shite and am not boosting atall because there bent in half because there so soft.,when a put the foot down you can hear lots of air coming out everywhere so think its my hoses.Also not dumping because of this.Any pics or that would be good.Cheers

sounds like a serious leak. didn u get somehoses with the actuator?

Link to post
Share on other sites
sounds like a serious leak. didn u get somehoses with the actuator?

Aye but they were gash and a lost the standard ones when i changed the actuators over.Pish no havin any power ,especially just after a put the manifold and that on,less power lol

Link to post
Share on other sites
go to any hydraulics/motor place and they should sort you out, its 6mm internal diameter you need. the one at the back of the actuator is the cnut to get to tho!

Tell me about it,a cable tied them tight last time.Am a better with hose clips ? Just its easyer with the ties.

Link to post
Share on other sites
ended up taking/ripping the efi off (had a non bodged together one anyway) and then got the hose on and its all good in the hood :)

Good stuff,i thought it was a pain in the arse trying to get the pipe off the turbo :) .Thats all my hose problems sorted out now :lol:

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...