Jump to content

Help With Blitz Bump Valve


Recommended Posts

i have a problem with my dump valve since fitting some new parts, it doesnt dump fully you get a small amount of dump but not alot and along with that you get a boost spike up to 0.9 to 1 bar and chatters also.

here is the spec:

front mount intercooler

airfilter relocation

j's manifold and decat

hks actuator

blitz ss bump valve

std exhaust(waiting on new one)

the boost is currently set for 0.8 bar maybe to close to fuel cut, i have tryed to clean the dump valve vac hose at both ends and lubed up the inner part of the valve i have checked all the intercooler pipework for leaks and still nothing, i have also tryed to bring the boost down a bit so that it isnt as close to the fuel cut but it still does the same thing.

any one know what it could be or other things for me to try?

Link to post
Share on other sites
The size of the hole that the dump valve attaches to on the intercooler pipework could be too small and not letting enough air out so it can't dump properly, I had that with mine.

we used the pipework for the DV that was already on it! we shall try another part of pipe :)

Gemz x

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...