ep91steve Posted March 19, 2011 Share Posted March 19, 2011 Got old coilover off ok. Can't get new on to put the two 19mm bolts on. Won't line up Quote Link to post Share on other sites
Dan507 Posted March 19, 2011 Share Posted March 19, 2011 what to do mean? Quote Link to post Share on other sites
birdmandan Posted March 19, 2011 Share Posted March 19, 2011 I dont quite understand what you mean buddy? Are the two 19mm holes too high or too low?If too low then jack up the wishbone until you raise them into place and then just give them a goood push to get em in and if too high, that i usually get someone to push down on the hub while i try push a bolt through....Dan. Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 The bit on the on the hub won't go into the coilover to put the two 19mm bolts in place. And there's no were to bolt the brake lines on to the coilovers (d2s) Quote Link to post Share on other sites
birdmandan Posted March 19, 2011 Share Posted March 19, 2011 Ahh yes you mean it feels liek the big piece of metal doesnt fit into the coilover? I remember when i had my D2's and i had to bash it in with a hammer or i may have tried to prize open the part on the coilover slightly But first just put a cloth over and bash it Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 Yep to high mate Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 We're did you put brake lines mate Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 Right got it lined up and bolt together. But were do a I put brake lines as on my tein coilovers they were bolt to coilover Quote Link to post Share on other sites
LeeG Posted March 19, 2011 Share Posted March 19, 2011 just cable tie it to the coilover. ave got the brake line brackets for d2's lying about sumwhere if your interested Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 Were do they attach to mate Quote Link to post Share on other sites
LeeG Posted March 19, 2011 Share Posted March 19, 2011 take the top shocker nut off of the bottom bracket and then put the brakeline bracket on then refit nut. simple. a never used mines but have them in the box. dont need them now as hav meister r Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 How much Lee Quote Link to post Share on other sites
LeeG Posted March 19, 2011 Share Posted March 19, 2011 whatever mate as i dont need them. Quote Link to post Share on other sites
ep91steve Posted March 19, 2011 Author Share Posted March 19, 2011 Pm me a price mate Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.