Sparky Posted March 26, 2011 Share Posted March 26, 2011 Right I cant really remember how to plum up the solenoid and its a bit different now I am externally wastegated.I have changed the solenoid from COM/NO to COM/NC, had a quick look on on the ACVR installation manual and it says COM goes to the top of the wastegate and NC to the Compressor housing, I always thought COM stood for compressor?Do I have to "T piece" from NC so one goes to the compressor housing and one to the bottom of the wastegate?Anyway as for the pressure sensor I take it just goes to the inlet to measure the boost pressure like any other boost gauge?Thanks for any help Lewis Quote Link to post Share on other sites
RobSR Posted April 2, 2011 Share Posted April 2, 2011 Run a vac line from your boost source to the bottom/side port on the wastegate. Put a "T" piece in that vac line and run it to NC..Vac line from COM to top of wastegate Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.