baberbaksh123 Posted July 25, 2011 Share Posted July 25, 2011 Hey, trying to figure out how to remove the speedo cable from the gearbox as I am taking the engine out for an overhaul.Have searched about but couldn't find anything.The cable goes through a metal tube into the box. At the top of the tube there are teeth cut out and ay the bottom of the tube its bigger and is screwed onto the box. Everytime I try to turn it it will only turn around a1/4 of a. Turn and when I let go it goes back into its origiinal position.Any help would be appreciated.Baber. Quote Link to post Share on other sites
Taggy Posted July 25, 2011 Share Posted July 25, 2011 Not sure if yours has the black kmh to mph converter sticking out the top but it will unscrew counter clockwise, if its springing back to the same position its because the sheath is spinning with it.Get some grips hold the cable sheath to stop it from spinning, then get another set of grips and turn the screw section, it might be a bit tuff but it should screw off.Hey, trying to figure out how to remove the speedo cable from the gearbox as I am taking the engine out for an overhaul.Have searched about but couldn't find anything.The cable goes through a metal tube into the box. At the top of the tube there are teeth cut out and ay the bottom of the tube its bigger and is screwed onto the box. Everytime I try to turn it it will only turn around a1/4 of a. Turn and when I let go it goes back into its origiinal position.Any help would be appreciated.Baber. Quote Link to post Share on other sites
baberbaksh123 Posted July 25, 2011 Author Share Posted July 25, 2011 thnaks, will give that a go. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.