omex shift light help plz

[xx YICK xx]

Anybody know where the red and blue wires go ????.....The instructions are for the old type coil, Thanks

[nazzurro19]

well i thought red for pos+ and then the blue for ya signal i.e into ya ecu

[xx YICK xx]

well i thought red for pos+ and then the blue for ya signal i.e into ya ecu

red...coil+

blue..coil-

black.ground

Thats all i got, Dont wanna risk tryin different places lol, Thanks anyway

[nazzurro19]

omex wiring diagrams

Distributorless Systems - Use the tachometer output from the ECU, or one of the coil

negative connections. For dual coil vehicles ALWAYS set the number of cylinders to two.

RED WIRE Connect this to the coil positive (+) terminal. If this is not easily accessible

then this wire can be connected to any positive feed that is switched by

the ignition switch.

told ya ;)

[xx YICK xx]

omex wiring diagrams

Distributorless Systems - Use the tachometer output from the ECU, or one of the coil

negative connections. For dual coil vehicles ALWAYS set the number of cylinders to two.

RED WIRE Connect this to the coil positive (+) terminal. If this is not easily accessible

then this wire can be connected to any positive feed that is switched by

the ignition switch.

told ya ;)

Thanks very much mate, Would you know the pin-out number by any chance if its no trouble, Thanks