hill_bill10 Posted October 3, 2011 Share Posted October 3, 2011 just dropped my 5E in and it runs perfect apart from it idles around 2000rpm wen up to temp. i have checked for any air leaks and cant find any, have also wound the adjustment screw all the way in and still no luckwat else could cause this? Quote Link to post Share on other sites
mech5107 Posted October 3, 2011 Share Posted October 3, 2011 Get a starting fluid can and carefully spray around intake. If it picks up revs, it has a leak. Then do it again but more localy (i.e. tb, intake manifold, etc).Also, get the adj. screw out and clean it. Quote Link to post Share on other sites
Socks Posted October 3, 2011 Share Posted October 3, 2011 do 5e's have the same idle adjustment screw on the throttle body as the 4e's?if so try that!iuf not defo a vac line leak or bigger! Quote Link to post Share on other sites
hill_bill10 Posted October 3, 2011 Author Share Posted October 3, 2011 im using the 4e throttle body with the 5e inlet mani. hmmm it must be a vac leak sumwere. just dont no were Quote Link to post Share on other sites
Socks Posted October 3, 2011 Share Posted October 3, 2011 try lowering it on the 4e tb... may be different idle setting from 5e to 4e Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.