dai_starletN/A Posted May 22, 2012 Share Posted May 22, 2012 (edited) as above ^^^ how do i plump this all up and where is rpm sensor as my rev counter doesn't work so I'm trying to find the fault.cheers Edited May 24, 2012 by dai_starletN/A Quote Link to post Share on other sites
Johnboy GT Posted May 22, 2012 Share Posted May 22, 2012 Your boost gauge vaccum pipe goes under the dash and there is a grommet in the bulkhead that leads right in behind your inlet manifold. Tees in nicely there dude!John Quote Link to post Share on other sites
StuDoc 72 Posted May 22, 2012 Share Posted May 22, 2012 Just done this over the weekend actually nice easy job mate. Like john said through the grommet for the speedo cable into the back of the boost guage then the other end you need a T piece and cut into the top vacuum hose on your BOV and take it from there. As with live and earth take them from the back of the cigarette lighter thats the easiest way ;) Quote Link to post Share on other sites
dai_starletN/A Posted May 22, 2012 Author Share Posted May 22, 2012 Thanks guys I'll look into to it ;) Quote Link to post Share on other sites
dai_starletN/A Posted May 22, 2012 Author Share Posted May 22, 2012 Any help on getting my rev counter to work on the dash I took it for a drive today and noticed that it moved just a little when I start the engine and doent move after that any ideas guys? Quote Link to post Share on other sites
dai_starletN/A Posted May 23, 2012 Author Share Posted May 23, 2012 Bump Quote Link to post Share on other sites
dai_starletN/A Posted May 24, 2012 Author Share Posted May 24, 2012 bump i noticed when the interior gets hot from the sun it moves a little bit any ideas guyscheers Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.