Ashstarlet200 Posted January 23, 2013 Share Posted January 23, 2013 Right guys in need of your help.I have the ct9 turboDump valveRelocated air filterStainless steel manifoldDecat downpipe with screamer pipeFront mounted intercoolerAfter market exhaust systemTurbo timer Now going to get a ebc or a hks actuator....What boost can i run safely on the car with the mods i have and not needing anymore (am willing to buy a fcd if needed) dont want to blow engine or anything Cheers guys Quote Link to post Share on other sites
starletburkie Posted January 23, 2013 Share Posted January 23, 2013 well just a fcd will blow the engine on its own! youll need a fpr aswell as the fcd! just under fuel cut so 0.8bar you can run on current setup Quote Link to post Share on other sites
Ashstarlet200 Posted January 23, 2013 Author Share Posted January 23, 2013 Sound ill turn it up a little to 0.8 then cheers mate. And with a fcd and fpr what can I run on that setup? Quote Link to post Share on other sites
starletburkie Posted January 23, 2013 Share Posted January 23, 2013 1.0bar on the ct9, thats the fcd and fpr set up with wideband Quote Link to post Share on other sites
smobey_sutton2 Posted January 23, 2013 Share Posted January 23, 2013 If you run 0.8 mate you'll start hitting fuel cut now and again as it will creep. Go for management mate, stay away from fcd and fpr's! Quote Link to post Share on other sites
starletburkie Posted January 23, 2013 Share Posted January 23, 2013 i ran 0.85 on ct9 and never had an issuse with fuel cut Quote Link to post Share on other sites
Ashstarlet200 Posted January 23, 2013 Author Share Posted January 23, 2013 For now ill run 0.8 until I sort some management out. Whats best a hks actuator or a ebc? Quote Link to post Share on other sites
starletburkie Posted January 23, 2013 Share Posted January 23, 2013 hks actuator and ebc ;) Quote Link to post Share on other sites
Snazzyblowfish Posted February 1, 2013 Share Posted February 1, 2013 Mines running 0.6 and hitting fuel cut. Fcd just makes it rev out at 3.5k and spit flames. Sounds wicked but cannot be good, have removed fcd and left it. Any ideas? Quote Link to post Share on other sites
Amjad Posted February 1, 2013 Share Posted February 1, 2013 Port the wastegates and run 0.8 bar, boost will hold a lot more stably Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.