kingo228 Posted March 27, 2013 Share Posted March 27, 2013 Hello guys just brought a safc. Struggling to work out what wires go were,Red - liveBlack - groundGreen - rpm signalYellow - ?White - ?Blue - ? Thanks guysDave Quote Link to post Share on other sites
Flaminsam Posted March 27, 2013 Share Posted March 27, 2013 Yellow and white are the wires to the map sensor. I believe blue is throttle position sensor which you won't be able to use unless you have a automatic tps I believe? Quote Link to post Share on other sites
kingo228 Posted March 27, 2013 Author Share Posted March 27, 2013 Ah okay on the ecu there is only one map wire do you recon I join them both onto that one? Thanks for the reply Quote Link to post Share on other sites
Flaminsam Posted March 27, 2013 Share Posted March 27, 2013 No you have to cut the wire in too. One colour goes to the ecu side and the other to the wiring loom side. Its how you adjust the fuelling. Although if you add too much fuelling the ecu will fuel cut I believe? Quote Link to post Share on other sites
kingo228 Posted March 27, 2013 Author Share Posted March 27, 2013 Ah right I get yah, I have currently a plug and play ecu but moving to a td04 turbo so its just in case I need to adjust the fueling at all Thanks Quote Link to post Share on other sites
triple j Posted March 27, 2013 Share Posted March 27, 2013 Ah right I get yah, I have currently a plug and play ecu but moving to a td04 turbo so its just in case I need to adjust the fueling at all Thanks I dont think the plug and play ecu will like an apexi safc messing with it, the plug and play ecu on its own should fuel the td04 just get fuelling checked. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.