TURBO Posted October 3, 2007 Share Posted October 3, 2007 Right I have a JAM FCC fitted to my car and it was installed before I bought it. The problem is im only able to run 13psi before my glanza hits fuel cut so the FCC cant be working! I have taken the glovebox out and checked all the wiring going into the ecu, all looks fine, soldered properly, no amateur job. The wiring is wired up to exactly the same wires as you would wire a HKS FCD to. Is this correct for the JAM FCC as I thought they were different? Does anyone know where I can get some info on this and maybe even a wiring diagram? Any help would be much apprectiated as this is doing my tits in now!!! Thanks Quote Link to post Share on other sites
Paseo-Wild Posted October 3, 2007 Share Posted October 3, 2007 Wiring for the FCC and the FCD should be the same i would have thought. Live, earth, map sensor and something else..... Quote Link to post Share on other sites
TURBO Posted October 3, 2007 Author Share Posted October 3, 2007 Yeah, it goes to the live, the earth and the the green and white wire from the FCC splises inbetween the boost wire or whatever it is? So if its wired up right what acn it be? Why is it not working?? Quote Link to post Share on other sites
Guest Enzo Posted October 3, 2007 Share Posted October 3, 2007 sorry i cant give you more assistance mate Quote Link to post Share on other sites
TURBO Posted October 3, 2007 Author Share Posted October 3, 2007 Think im just going to have to buy a HKS FCD and re-wire it! Must be the FCC that screwed!! unless anybody knows anything else? Quote Link to post Share on other sites
Paseo-Wild Posted October 4, 2007 Share Posted October 4, 2007 If its all wired up and no broken wires etc then must be a dodgy FCC mate. ;)Let us know if a new unit solves the problem. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.