Anglas Posted October 29, 2013 Share Posted October 29, 2013 (edited) Please help After installing the new clutch, it doesn't want to release. Used this clutch: http://speedvisioncps.com/index.php?main_page=product_info&cPath=6&products_id=60Used new release bearing. Clutch cylinder bleeding done. Cylinder arm is moving at the gearbox. Edited October 29, 2013 by Anglas Quote Link to post Share on other sites
Broony Posted October 29, 2013 Share Posted October 29, 2013 Might sound daft but have you adjusted the clutch pedal in the footwell? If not did you install the clutch plate the correct way round . sorry if im teaching you to suck eggs Quote Link to post Share on other sites
Anglas Posted October 29, 2013 Author Share Posted October 29, 2013 On 10/29/2013 at 7:39 PM, Broony said: Might sound daft but have you adjusted the clutch pedal in the footwell? Ohh, try to adjust it tommorow. Thank you! Quote Link to post Share on other sites
DevonGT Posted October 29, 2013 Share Posted October 29, 2013 Do you have a 5E? Quote Link to post Share on other sites
Anglas Posted October 29, 2013 Author Share Posted October 29, 2013 On 10/29/2013 at 8:06 PM, DevonGT said: Do you have a 5E? Yes. Quote Link to post Share on other sites
Anglas Posted October 29, 2013 Author Share Posted October 29, 2013 On 10/29/2013 at 7:39 PM, Broony said: If not did you install the clutch plate the correct way round . Its possible to install the clutch plate the wrongway round? What a noob I am!!! Quote Link to post Share on other sites
Anglas Posted October 30, 2013 Author Share Posted October 30, 2013 (edited) Not possible to install the clutch plate the wrong way round. Now i will try to install stock pressure plate Edited October 30, 2013 by Anglas Quote Link to post Share on other sites
Anglas Posted October 30, 2013 Author Share Posted October 30, 2013 (edited) On 10/30/2013 at 10:53 AM, Anglas said: Not possible to install the clutch plate the wrong way round. Now i will try to install stock pressure plate Cluth working with stock pressure plate and aftermarket clutch plate Edited October 30, 2013 by Anglas Quote Link to post Share on other sites
micky boy Posted October 30, 2013 Share Posted October 30, 2013 Do you mean it wont go into gear? Quote Link to post Share on other sites
Anglas Posted October 30, 2013 Author Share Posted October 30, 2013 On 10/30/2013 at 4:06 PM, micky boy said: Do you mean it wont go into gear? I installed this clutch kit: http://speedvisioncp...&products_id=60 and clutch always working, never releace. Then I change only pressure plate (Stock pressure plate + aftermarket clutch plate) and everything is working fine. (Not tested with high boost) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.