Zeldoz Posted November 14, 2013 Share Posted November 14, 2013 So this is probably an easy thing to do.. But history and starlet HT leads doesn't boad well with me. In my old rep 2 years ago i managed to snap the arm clean off the dizzy cap that the HT leads plug into.. Is there a technique to removing them? Just received my blue HT leads from Burny, and dont want a repeat of my last HT lead changeover!! Thanks Quote Link to post Share on other sites
Chris Green Posted November 14, 2013 Share Posted November 14, 2013 Yes, on the UK spec (can't see it being different on a FTE) you need to push the clips outwards. A small flat screwdriver will come in handy. Took me a while to figure it out. Quote Link to post Share on other sites
Zeldoz Posted November 14, 2013 Author Share Posted November 14, 2013 Yes, on the UK spec (can't see it being different on a FTE) you need to push the clips outwards. A small flat screwdriver will come in handy. Took me a while to figure it out. Screwy in underneath and gently pull out.. (off the arm?) Quote Link to post Share on other sites
Chris Green Posted November 14, 2013 Share Posted November 14, 2013 It's hard to explain in writing. On the actual clips there is another clip/tab it's usually point downwards. It is quite small but you pull it outwards and pull the big clip out, if you know what it mean. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.