GlanzAndy Posted December 7, 2013 Share Posted December 7, 2013 A Late Good Evening! As per the title - If I was to buy a TD04 turbo kit will I need anything else? Or can I simple bolt it on and reset the JAM ECU? For example do I also need an upgraded intake manifold? Car: Glanza V 1998 Mods: Air filter relocation kit FMIC Toyosports Manifold & Decat 5Zigen Exhaust JAM ECU Quote Link to post Share on other sites
aidanep71 Posted December 7, 2013 Share Posted December 7, 2013 Your filter relocation will need modification as will your hot pipe to the cooler, a decent clutch if ya haven't got one already, oil+ water lines for the turbo, wastegate/actuator if not included in kit. And yo will obviously have to get the fueling checked Quote Link to post Share on other sites
GlanzAndy Posted December 8, 2013 Author Share Posted December 8, 2013 Your filter relocation will need modification as will your hot pipe to the cooler, a decent clutch if ya haven't got one already, oil+ water lines for the turbo, wastegate/actuator if not included in kit. And yo will obviously have to get the fueling checkedSorry it has an uprated clutch!The kits come with the oil & water lines, and wastegate.My Glanza came with a Blitz 4 Stage Boost controller - can I use the actuator that is attached to my CT9 Turbo on the TD04? Quote Link to post Share on other sites
aidanep71 Posted December 8, 2013 Share Posted December 8, 2013 If it's a Hks actuator you have you could make a new bracket for it easily Quote Link to post Share on other sites
td04 glanza Posted December 8, 2013 Share Posted December 8, 2013 I would personally stear clear of the toyosports kit buddy, its cheap and nasty! Far better just saving a little more and go for zisco, race tech or wepr. People are always selling used setups for good prices and you wont need to strip it all down again when it cracks.Allan Quote Link to post Share on other sites
GlanzAndy Posted December 8, 2013 Author Share Posted December 8, 2013 If it's a Hks actuator you have you could make a new bracket for it easilyAll I can say is it's a threaded / adjustable actuator?! Probably a HKS as they are so common right.Was on the car when I bought it :-s Quote Link to post Share on other sites
aidanep71 Posted December 8, 2013 Share Posted December 8, 2013 Ya more than likely is I made my ct9 one fit a Garrett so I'm sure you could do it with the td Quote Link to post Share on other sites
GlanzAndy Posted December 8, 2013 Author Share Posted December 8, 2013 Ya more than likely is I made my ct9 one fit a Garrett so I'm sure you could do it with the tdOkay thank you for the advice! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.