Happyb Posted January 6, 2014 Share Posted January 6, 2014 The spring in my sr rev clocks has unwinded! Is there any way of fixing this or replacing it? Quote Link to post Share on other sites
morgey Posted January 6, 2014 Share Posted January 6, 2014 I've got some paseo clocks in bits you might be able to replace yours with it if theyre the same Quote Link to post Share on other sites
Happyb Posted January 6, 2014 Author Share Posted January 6, 2014 Maybe lad is the spring and all ok in it is say dey are da same! Quote Link to post Share on other sites
morgey Posted January 6, 2014 Share Posted January 6, 2014 I'll grab a picture of mine so you can compare, the odometer was the only part not working on them. Quote Link to post Share on other sites
morgey Posted January 6, 2014 Share Posted January 6, 2014 Just had a look at mine and they fall down to which ever side of vertical its leaning towards, there's no actual coil spring its all electric. Pictures in one min. Quote Link to post Share on other sites
morgey Posted January 6, 2014 Share Posted January 6, 2014 (edited) this is the inside of mine under the dials, as you would look at from the drivers seat. and this is the back the 3 screws are what hold it in place so yours need to match these. Edited January 6, 2014 by morgey Quote Link to post Share on other sites
Happyb Posted January 8, 2014 Author Share Posted January 8, 2014 Seem the same alright do u think I could fix them using them? Quote Link to post Share on other sites
morgey Posted January 8, 2014 Share Posted January 8, 2014 If they remove easily enough you should be able to just swap them over. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.