Jump to content

Recommended Posts

  • 2 weeks later...

hope this helps, copied from another forum.

I have just fitted some glanza clocks into my SR. There is a pin out for doing this but it does not cover all 3 dash/wiring types I got part way into swapping the wires over and realized my wiring was not the same as the pin out! so after quit a bit of head scratching I came up with a really easy answer! remove the speedo and the rev counter from the glanza housing, remove them from the SR clocks and fit the glanza clocks to the SR housing job done!! every thing works as it should and there is NO wires to change! just plug in the speedo cable and wires and every thing works! but you will still need a speedo converter tho I am using indiglo dials with the 180 MPH face but it will work the same with the standard glanza dials too.

hope this is some use to some one it sure made the job a lot easier for me

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...