asa.mansfield Posted April 25, 2014 Share Posted April 25, 2014 I have to change my slam panel soon, anybody done one before? is it just bolted or is it bolts and spot welded? welding needed? Any information would be great, thanks Quote Link to post Share on other sites
Aamir Posted April 25, 2014 Share Posted April 25, 2014 Not sure how hard they're to change but I have a breaker here that Im willing to chop up if you need the slam panelAamir Quote Link to post Share on other sites
AdamB Posted April 25, 2014 Share Posted April 25, 2014 The upper part is welded I believe. The middle section is bolted to the headlight brackets, just unbolt it from there and away you go, you have to remove the indicators to get to it though. Quote Link to post Share on other sites
Idrees Posted April 25, 2014 Share Posted April 25, 2014 You'll have to drill out the spot welds to remove it. Quote Link to post Share on other sites
richdog Posted April 25, 2014 Share Posted April 25, 2014 As above quite a few spot welds to drill on the slam panel but take your time plus a bit of common sense not hard to do.Good luck with it. Quote Link to post Share on other sites
asa.mansfield Posted April 25, 2014 Author Share Posted April 25, 2014 alright thanks guys. one more question, it's a starlet slam panel the same as a glanza's? Quote Link to post Share on other sites
turbo Grant Posted April 25, 2014 Share Posted April 25, 2014 Would have thought the panels will be the same on a uk spec and V once you drill the spot welds out you could always just but and bolt it back on with M6's Quote Link to post Share on other sites
asa.mansfield Posted April 25, 2014 Author Share Posted April 25, 2014 cheers for the help! have to get one and have a little play with it Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.