Glanzacoley Posted October 14, 2014 Share Posted October 14, 2014 I'm thinking of buying a second hand boost gauge & what I've been told is a boost controller. I need some confirmation on what I'm buying, & how it works too please. There's no holes for vacuum lines or anything many thanks Quote Link to post Share on other sites
fremyjay Posted October 14, 2014 Share Posted October 14, 2014 Not a boost controller its a controller for the defi gauges Quote Link to post Share on other sites
Glanzacoley Posted October 14, 2014 Author Share Posted October 14, 2014 So if I wanted to run the boost gauge I would need the boost module I'm assuming mate just had a little look online think I understand how ther work, Quote Link to post Share on other sites
fremyjay Posted October 14, 2014 Share Posted October 14, 2014 similar to this, the gauges plug into that control box in your pictures, then your sensors go from that box to engine bayhttp://i1221.photobucket.com/albums/dd464/fortneja/defi_zps42ba1c33.jpg Quote Link to post Share on other sites
Glanzacoley Posted October 14, 2014 Author Share Posted October 14, 2014 Ok mate have you got a pic of the sensor because it's missing so is have to buy one many thanks Quote Link to post Share on other sites
fremyjay Posted October 14, 2014 Share Posted October 14, 2014 http://www.ebay.co.uk/itm/like/181513964411?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=m&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0Same as that bud Quote Link to post Share on other sites
Glanzacoley Posted October 14, 2014 Author Share Posted October 14, 2014 What's this then mate? Does this plumb into the boost line? Then the wire plugs into that controller, then gauge into controller that's right ain't it mate Quote Link to post Share on other sites
fremyjay Posted October 14, 2014 Share Posted October 14, 2014 Problem is you need the connector bud as you won't be able to wire that into the box Quote Link to post Share on other sites
Glanzacoley Posted October 14, 2014 Author Share Posted October 14, 2014 Ok mate but it I could find a connector that's what is need is it mate? The gauge & controller is that good for £50 mate? Quote Link to post Share on other sites
fremyjay Posted October 14, 2014 Share Posted October 14, 2014 Yeah all the sense is reading is the boost level, you just need the right connection to fit the module but finding just the connector would be tricky, I've seen defined gauges go for around £70-£100 but complete so I would say its fair as the connector will make up the other £20-£25 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.