mike.swarbrick Posted January 10, 2008 Share Posted January 10, 2008 Hey guys and girls,I noticed a little while ago that my oil temperature gauge isn't working. Is this an easy, inexpensive job? Or (knowing my luck) be a pointlessly expensive and time consuming job?It is weird though, when I start the car, it says its below cold, then when I turn it off (after driving for a while) it goes slightly further down...Any advice on the matter would be greatly appreciated! I have an EP82 NA. Cheers. Quote Link to post Share on other sites
Guest Enzo Posted January 10, 2008 Share Posted January 10, 2008 this is a comon problem, the thermostats away, its an easy job mounted on the side of the engine above the gearbox.threee nuts and you can take the old one out and put the new one in, be gental with the bolts as they could snap ;)hope that helpscould you please post in the right section with any of your technical quearys, saves me moving the post in to the right section Quote Link to post Share on other sites
Glanza_Ragger Posted January 11, 2008 Share Posted January 11, 2008 If you have a faulty oil gauge, try replacing the sensor.Also check the wire leading to it hasnt been chaffed/cut.Sensors can be bought from Demon Tweeks for about a tenner or so Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.