Mad Mike EP82

Looks slow!!!!

ttt

Item For Sale: 4E Forged engine Item Condition & Description: JE 75mm Flat top pistons Scat forged rods ARP head and rod bolts JE 1.2mm Head gasket ACL beraings(standard size) Polished crank Race-Tech trap door baffled sump Full dynamic balanced bottom end 8000rpm (spec sheet included) Toyota oil pump Toyota Water pump Toyota gasket kit Toyota Freeze plugs Blueprint cam belt kit Block was fully stripped and cleaned (Painted Blue) lightly ported 4e head everything else is stock Twin breather cam cover -8 fittings (Black) NGK Spark plugs (Brand new) Comp Clutch light weight flywheel balanced with crank etc Inlet with thermal gasket,alternator,distributor included Engine was built July 2015 Millers mineral running in oil used 5 changes over 500 miles then oil was changed to Millers CFS 10/60 fully synthetic and only done 1500 miles. With a hybrid TD04 it made 328bhp 295ftlbs Compression test results to follow any other info pm me Price:£1750 Pictures: Payment & Shipping Details: cash on collection preferred (delivery can be arranged additional cost will apply)

Bad times!!! Was the car mapped after you changed head gasket tim? If your after a forged motor let me know.

Agreed with above forget mega power, spend your money on chassis and tyres, get the handling balance how you like it then up the power!!

Yep starlet box is crap!!! I'll be back with something faster😂

I was planning to do cadwell in club class but due to multiple gearbox failures I won't be going 😞

Unless you have highly developed aero pro class isn't for you

This might help. roll cage.pdf

Uk Time attack Only pro class requires roll cage.

It sucks!!! just started to dry out as well would have been fun lol, I've already got my next project sorted but cheers for offer

£700 😂

car will probably be stripped. been looking at other things for a while, sadly this was the final nail in the coffin.

>https://www.youtube.com/watch?v=E1blmhuPHJc

Matt is a top Bloke mapped my car a few times 👍 Never had issue.

ACLs are fine my engine did 45000 of hard track abuse looked like new when I rebuilt my engine!! Also freshly built engine that had only seen idle oil looks very black and your block is very dirty IMO.

Dirty bolt holes giving incorrect torque reading causing head to lift blowing your head gasket. My guess.

Both rear wheel bearings failed ????

Also re torque head if you didn't clean bolt holes out, probably backed off.

Try new oils etc may need changing a few times just to make sure it's clean

Is this new oil and coolant that's mixed?

what are stock valve spring good for out of curiosity?

I think so but as I only got 5 laps hard to tell next Trackday will decide.

New splitter In action.

Cheers dude 👍