nano

Hi, as above, anyone? Shipping to france. Thanks

Bump

Still for sale?

Bump

Please show me what you got mate

As above, anyone has a lightweight bonnet for my ep82? And a glanza front bumper oem or after market. Show me what you durs have for sale. Cheers

Thanks rock kick ass.

My thoughts were right, paypal refunded me. Now the seller is asking money because he says the item has been sent and signed. The problem is my friend never got it! When I ask him tracking numbers and suff,he says he doesnt have it Any more. What à joke

Yep, afr s in the range. 11,5 when cold. 14-15 at idle and cruise

Alternator belt sorry

The screw on top of distributor should be aligned With the second ridge of camcover (almost). Have a look at it and position it the way you removed it

Harness was touching cam belt, and cut off 5 wires. I re wired it, plus the efi fuse.thanks

Sûre there should be no lite mate With car off. Sorry but what is a draw ?

Hi all, I checked wires on ecu, earth etc. Its perfect I have 15 at idle. However even With no ignition on, there is low Light on the lamps, a very very Light Light. Means thats the lamps are getting low voltage. Is this due to ground cable on the batery?

Around 300 km, normal driving,because I put a new metal headgasket oem thickness by zisco and new coolant. And if your asking why I put New hg, its because I installed new seal valves and I wanted to check if everything is in good condition. Yeah I said I have stock fuel system,the fuel pump is actually walbro which was installed à long With the engine 3 or 4 years ago.

Hi mate, How to put pics up? I ll show you the plugs. Both 02 sensors are well screwed now, no change. I Just turned ignition on after 2hours the car sat the jauge does not dysplay the --- but 17. I remembered i did that before and I could see the --- Just after 5 minutes.

Is it possible the aem read rich and it s actually not?

The spark plugs are all white... I removed the fuel rail, holding the 4th injectors With hand and my friend turn ignition on. And it sprayed fuel With no engine on

And what if I removed fuel rail With injectors and turn ignition on and see if ône is open?

Hi colin what your sayin is touching each injector With a metal bar and see if i hear them clicking ? And as for the plugs ône should be different due to petrol?

Today I checked the dipstick and it was smelling petrol. I removed the oil and the bolt sump was very greasy. What causes this? The car starts no problem and doesnt overheat

I ll check how they are. And I know the 02 sensor is hand tightened.may be it s an air leak.

Yep starlet n/a I did like the procedure. And plugs are new bkr7e-11. Can it be something like alternator belt not well tightened and a weak battery? Or a faulty injector?

Coolant sensor is New and oem. Part number is 89422-35010 for ep91 89422-20010 for ep82. My connector is green and sensor is grey. I have the ep91 model.