Bertie

Guys, may be off the topic but I installed stand alone ECU . How do I get my Aircon to work again. Light inside goes on blower works, There is gas in the AC, but clutch on pump does not engage. Please help can I hard wire it ??

Bertie

We have it sorted it out. running Spitronics management. running

13 to 24 degrees timing depending on boost - we also upped the injectors to 470 cc. She pulls pretty strong..

JAY LOOKS GREAT MAN .....................

bump

I have the same problem, but this happened after installing after market ecu - where is the signal wire on the Rev counter looked every where and could not resolve this. Heat gauge is all the way to the top - so we night have cut a common wire - can anyone help please.

Thanks Bertie

Hi I am still very new to all af this.. What would you say in degrees you would retard ignition timing when running 1.3 to 1.5 bar boost on a forged motor with 370 cc injectors (95 octane) ( round about 8.15 :1 compression ratio) ( normal timing is 10 degrees I think)

thanks Bertie

it 17 inch wheels

Great we can then exchange information ...

My plan is to install either a Unichip on the standard computer or fully stand alone Dictator.

Its a much safe way of boosting higher .... Suppose also depends on your hight above sea level. All our drag racing cars in Namibia has that installed..Check this video...

http://www.turbomirage.com/water-alcohol-injection-videos.html

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8189_zps811a2e1d.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8191_zpscc0bf530.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8192_zps9100bfc5.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8193_zpsb22e7b44.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8194_zpsbed5440b.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8197_zpsf1b651e2.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8198_zps424b0f34.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8154_zpsd63a0a7c.jpg.html'>

http://s1360.photobucket.com/user/Bertie2639/media/IMG_8169_zps94402523.jpg.html'>

All

I am thinking of installing a water /meth kit on my starlet - the motor is forged with CP pistons, Scat H-beam rods, Arp bolts, MSL head gasket, 370 cc Injectors. Running a Borgwarmer KKK 14 turbo, front maint intercooler and fuel pressure regulator.

Any one done this before? Main reason for doing this is for the benefit of running higher boost and lower intake temperature. I also heard you an also increase timing with such system.

Looking forward to your comments.

Bertie

Hi all

I am new to this, but enjoy reading all the posts. We have a EP82 club in Namibia. We have 7 running starlets in Windhoek. there is a few other, but they are in ICU at the moment. I bought my baby 1 year ago and love it. I will post a few pictures once I figured out how to.

regards Bertie

Will most probably cost a arm and a leg.. HAHA any idear on the costs?

Any posibility to ship this unit to NAMIBIA??