Tom Selby

10 minutes ago, Gainzy said:

20 mins from me I will keep an eye out for it..again

Im sure you will be seing it at some point, sounds like hes going to be 'dailying' it for a bit  wasnt nice to see it go, just praying he looks after it ! 

SOLD ! 

SOLD 

Going up to sunderland 

Not quite sure why pics arent in the order i put them in

Have wrote a for sale add out, just waiting to to be approved 

FOR SALE 98 Glanza V

Odometer reading - 135902km (84445 miles)
MOT - Sep 2019
Imported - July 2015
V5 present in my name
I am the 2nd UK owner

This car is VERY clean inside and out !
The car is very clean underneath and has been undersealed.

It was pretty much standard when I bought the car at the start of 2017, since then all mods have been done in my ownership.

Just had oil and filter change ready for sale.
Has had oil changed every 5000 miles.
Cam belt was done in June 2016, have receipt for cam belt
Very well maintained, no money spared, if its needed something, its had it.
I have a folder full of receipts for pretty much everything done to the car, including cam belt, stage 2 clutch and fly wheel, also have the BIMTA certificate from when imported and dyno print out.
The odometer reads in kmh but the speedo reads in mph (has mph backing, i still have the original kmh one too)

Electric windows, electric mirrors and air con all work as they should

Car has 2 Keys, 2 alarm fobs and 2 immobiliser fobs

The car has been a weekend toy and to take to shows, never taken out in the wet.
Only ever ran on shell v power and bp ultimate fuel.

New car forces sale
I will be very sad to see this car go. Would love to keep it but simply dont have the room.

Link to the build thread
http://www.ukstarletowners.com/topic/106261-toms-98-glanza-v/

SPEC
1.3 4EFTE
187.4 bhp 180 ftlb @ 1 Bar Boost
With print out

Engine & Bay
CT9 Turbo
Tuning developments manifold
HKS Actuator
Downpipe
Japspeed Exhaust System
Magnecore HT leads
Competition Stage 2 clutch (ready for TD04 setup)
Competition ultra light flywheel
Roose Motorsport Rad Hoses
TRD 1.3 Bar Rad Cap
TRD Oil Cap
Cusco Blue Rocker Cover
OEM Front Strut Brace

Air & Fuel
Front Mount Intercooler (bumper hasnt been cut)
Short Route Pipe
Meshed Turbo
Tuning developments 255 fuel pump

Brakes and Handling
EBC drilled and grooved disks
EBC yellow stuff pads
HEL Braided lines all round
Dot 4 race fluid
KYB Excel G shock absorbers

Electronics
EManage Blue ECU
GFB Gforce II Electronic Boost Controller
3 Port Boost Solenoid
3 Bar Map Sensor
Greddy Turbo Timer
Prosport Boost Gauge
Prosport Oil Pressure Gauge
Prosport Oil Temperature Gauge

Exterior
Lenso rs5 wheels
OEM Wind Deflectors
IdWorkz OEM Front Lip
Genuine OEM Rear Lip
Genuine Ducktail Spoiler

Interior
KODE Steering Wheel
KYB Boss (resistor fitted for air bag light, light comes on and goes off on the dash as it should)
TRD Gear Gaitor
D1 Spec Caron Fibre Gear Knob
3 Gauge Pillar Pod
Chrome/mirror rear tints

Security
Toad Ai 606 Cat 1 Alarm system
Auto Watch immobiliser
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Standard parts to go with car
Cat
Steering wheel
Pillar plastic
Rear wiper and motor

 £5450 OVNO !!
No silly offers, THIS CAR IS CLEAN !
Serious buyers only
*Test drives will be done by myself *
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
I also have a set of clean honda integra dc2 type r seats that I have used in the car

Also a set of buddy club p1 wheels (2 tyres are new, 2 pretty much new, all pilot sport 3s)

Seats or wheels will be at an extra cost

Cheers mate 

And a mitsubishi evo 5 gsr 

Fresh import with a few ralliart goodies on it 

Not been on here and posted for a bit but its now sadly coming to an end with the glanza the replacement is coming on saturday, i will make an add for the glanza soon, been an awsome couple of years in the seat of a glanza and dont really want to get rid but has to go .. onwards and upwards as they say 

1.3 bar rad cap now on, next up i think is a nice fresh half rad 

Also been getting the car ready for modified nationals next weekend, given it a 2 stage polish and removed the swirls and now also  appparently reflects quite well 

New front brake kit went on today aswell as fresh near brake disks, pads and bearings

Also fitted the new steering wheel and boss and sorted the resistor for the airbag light 

Now ready for a few shows but unfortunately didnt book for japfest tomorrow 

Just put the boss and steering wheel on

Its the 2 red wires on the resistor you need to use for this kit if anyone needs to know for future 

Thats what im using google translate app 

Started my japanese homework 

6 hours ago, tahiRR said:

Get live google transolater on your phone and it should transalate all on your phone screen bro 

 

cheers

tahirr 

Yes good idea ! Ill give it a go 

7 minutes ago, akyakapotter said:

just plug one of the red and black in id say the other set are for passenger airbag if you have one. 

cheers nick. 

Ok thanks, i do have passenger air bag, will all wires from the resistor need plugging into the conector if possible if thats the case ? 

Got my new hkb steering wheel boss today, bit unsure with it, anyone able to shed any light for me please ? 

Made a post in the electronics section

http://www.ukstarletowners.com/topic/108322-steering-wheel-boss-kit-resistor/?do=findComment&comment=1228447  

On 4/29/2018, 1:28:11, hutchy1990 said:

Keep up the good work looks mint

Cheers mate getting there slowly

Not sure if this is the right place but,

Got my hkb steering wheel boss in the post today with airbag cancelling resistor

Obviously instructions are in japanese and dont understand a word of it 

The resistor has 2 black and 2 red wires coming from the resistor

The instructions show only 2 wires plugging into the air bag connector (im guessing the 2 red wires from the drawing ?) Are the 2 black left and taped up ? 

Has anyone else fitted the hkb resistor boss kit and able to tell me which wires to use ? 

Thanks 

Had a nice big delivery today from mike at tuning developments, great service as always  

Also a few more bits in the post from else where and waiting for them to get to me 

Ill be putting new brakes on each corner on mine soon, does anyone know the torque settings for the rears as they have the bearings ? 

Thanks 

Cheers guys, still not finished yet, always something to do !!

Finally had the front lip bonded on and fitted the rear lip, looks much better now! 

On 3/4/2018, 1:52:15, akyakapotter said:

I have bought up the issue with admins.

cheers nick.

Just managed to pay now, issue must be sorted

Thanks 

This has just happened with me too whilst trying to renew

49 minutes ago, Gainzy said:

Cover looks spot on

It does ! You chose a great colour