-
Content Count
180 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by glanzatd04l220
-
-
just looking to know if the cusco rear coilovers can be rebuilt, the two i have are both leaking.
kevin
-
as above looking a tial or turbosmart wastgate with flanges if possible. let me know what you have.
kevin
-
im using a standard corolla clutch in my car ( RYMEC VA6084) running 1 bar 215bhp for over 5500 kph and is standing the power perfect, also was only £80 for the kit.
kevin
-
i made my own ramhorn mani but when i made the decat i only made it 2" so looking any 2 1/2" decat and i'll modify it to suit my set up.
kevin
-
i also bought a cheap gauge and it was reading 0.2 bar more, so bought a racetech and its spot on.
buy cheap buy twice.
kevin
-
wanted td04l down pipe 2 1/2 inch no toyo sport rubbish. prefer mild steel but will consider stainless steel.
kevin
-
The injectors were flow tested, if i fitted the 370cc injectors would the ecu not just flow the same amout of fuel through them as the 295cc injectors
Kevin
-
Running td04l with all supporting modes ecu e manage blue, im using standard 295cc injectors but was looking to know if i put a set of these 370cc injectors in will the car run fine or will she need remapped?
Kevin
-
ive a set off 370cc injectors direct fit if your interested.
kevin
-
i'll replace the ht leads, distributor cap and rotor arm and see if it helps.
kevin
-
changed the plugs to ngk bkr7eix and still interferes with the tv.
kevin
-
going to replace the spark plugs and see what happens, what plugs should i put in? running tdo4l at 1 bar 215 bhp.
kevin
-
it interferes with the tv's like a mini moto, might try different plugs and see if it helps.
so no one else's car interferes with tv's?
kevin
-
i know lads its a joke, i even heard a women in the shop saying she 's going to report me to the police little did she know i was standing behind her.
would having the wrong plugs in be interfering with the tv's, and im not running cb or scanner.
-
right i have been getting complaints about my car interfering with peoples tv's in the estate, does anyone know why my car is doing this?
thanks kevin
-
-
only cost me £200 for e manage blue, harnesses and 3 bar map sensor, then got it mapped for £180 so cost £380 all in.
kevin
-
if i remember right its the reverse lights switch.
kevin
-
the ticking noise can also be the idle control valve.
kevin
-
my car does the same thing but it was due to me changing to the civic dual core half rad.
kevin
-
hi lads in need of a rear passenger caliper for the glanza v, would be great if i could get one local in NI.
kevin
-
lol my heads away with it, to early in the morning still sleeping.
kevin
-
Is the na rear caliber the same as the glanza rear caliber cause mine is sticking.
Kevin
-
ive a set of 370cc celica gt injectors (green tops) if your interested. £80 posted.
kevin
DIY manifold-what piping
in Intake, Turbo & Exhaust
Posted
when i made my mani i used 1 1/4" 45 short radio bends sch 40 3.6mm thick, if i mind right i needed 12 bends to make a ram horn mani and i bought them of a company called BSS.
if i mind right i sent u a bend for your external wast gate, thats what i made my mani out of.
kevin