Jump to content

glanzatd04l220

Member
 View Profile  See their activity

  • Content Count

    180

  • Joined

  • Last visited

 Content Type 

Everything posted by glanzatd04l220

  1. glanzatd04l220
    when i made my mani i used 1 1/4" 45 short radio bends sch 40 3.6mm thick, if i mind right i needed 12 bends to make a ram horn mani and i bought them of a company called BSS. if i mind right i sent u a bend for your external wast gate, thats what i made my mani out of. kevin
  2. glanzatd04l220
    just looking to know if the cusco rear coilovers can be rebuilt, the two i have are both leaking. kevin
  3. glanzatd04l220
    as above looking a tial or turbosmart wastgate with flanges if possible. let me know what you have. kevin
  4. glanzatd04l220
    im using a standard corolla clutch in my car ( RYMEC VA6084) running 1 bar 215bhp for over 5500 kph and is standing the power perfect, also was only £80 for the kit. kevin
  5. glanzatd04l220
    i made my own ramhorn mani but when i made the decat i only made it 2" so looking any 2 1/2" decat and i'll modify it to suit my set up. kevin
  6. glanzatd04l220
    i also bought a cheap gauge and it was reading 0.2 bar more, so bought a racetech and its spot on. buy cheap buy twice. kevin
  7. glanzatd04l220
    wanted td04l down pipe 2 1/2 inch no toyo sport rubbish. prefer mild steel but will consider stainless steel. kevin
  8. glanzatd04l220
    The injectors were flow tested, if i fitted the 370cc injectors would the ecu not just flow the same amout of fuel through them as the 295cc injectors Kevin
  9. glanzatd04l220
    Running td04l with all supporting modes ecu e manage blue, im using standard 295cc injectors but was looking to know if i put a set of these 370cc injectors in will the car run fine or will she need remapped? Kevin
  10. glanzatd04l220
    ive a set off 370cc injectors direct fit if your interested. kevin
  11. glanzatd04l220
    i'll replace the ht leads, distributor cap and rotor arm and see if it helps. kevin
  12. glanzatd04l220
    changed the plugs to ngk bkr7eix and still interferes with the tv. kevin
  13. glanzatd04l220
    going to replace the spark plugs and see what happens, what plugs should i put in? running tdo4l at 1 bar 215 bhp. kevin
  14. glanzatd04l220
    it interferes with the tv's like a mini moto, might try different plugs and see if it helps. so no one else's car interferes with tv's? kevin
  15. glanzatd04l220
    i know lads its a joke, i even heard a women in the shop saying she 's going to report me to the police little did she know i was standing behind her. would having the wrong plugs in be interfering with the tv's, and im not running cb or scanner.
  16. glanzatd04l220
    right i have been getting complaints about my car interfering with peoples tv's in the estate, does anyone know why my car is doing this? thanks kevin
  17. glanzatd04l220
    if your looking injectors ive a set of 370cc direct fitment injectors for sale. kevin
  18. glanzatd04l220
    only cost me £200 for e manage blue, harnesses and 3 bar map sensor, then got it mapped for £180 so cost £380 all in. kevin
  19. glanzatd04l220
    if i remember right its the reverse lights switch. kevin
  20. glanzatd04l220
    the ticking noise can also be the idle control valve. kevin
  21. glanzatd04l220
    my car does the same thing but it was due to me changing to the civic dual core half rad. kevin
  22. glanzatd04l220
    hi lads in need of a rear passenger caliper for the glanza v, would be great if i could get one local in NI. kevin
  23. glanzatd04l220
    lol my heads away with it, to early in the morning still sleeping. kevin
  24. glanzatd04l220
    Is the na rear caliber the same as the glanza rear caliber cause mine is sticking. Kevin
  25. glanzatd04l220
    ive a set of 370cc celica gt injectors (green tops) if your interested. £80 posted. kevin
×
×
  • Create New...