decdd19

is there a "how to" or just something identifying all connectors in the engine bay loom have a few left over connectors just struggling to identify them thanks

Got the hose kit off tuning developments very good quality...

No mate nearly there but still lots to do

Nearly there new magnecore leads and trd oil cap on the home straight to waking her up ha such a pity about the manifold An leads to plugs are clip type but the king lead is clip type one end and push on the other end is this normal as the last set I had were both clip type on king lead? Those seem to fit an make good connection...

Ya would want a hydraulic crimps for that ha least it gives me an idea thanks again

No getting it ready to try turn over ha Where are you getting the battery terminals look smart? No mate your grand thanks though was just after there locations an a rough idea of the size of wire as want to make up some the weekend

Engine an box to the chassis , the ones in the loom are pretty straight forward

Sorted on starter alternator and inlet Mani Any idea how thick the wire is or should be off the other earth's

How many earth's on these engines an where are they roughly thanks

Short route pipe landed intercooler is going to pipe up very neatly just need to shorten a few pipes in work Standard p/s bottle on have a rw developments bottle are the holidays And front arb poly bushes Slowly running out of engine space

Absolutely made for it so they were ha

Thanks mate she's slowly taking shape

Rear caliper carriers fitted and rear id workz discs bearings cleaned checked and greased also painted the front hub caps black to blend in with the wheels Got my Cusco pan hard rod greased up and fitted along with white line rear arb Slowly but surely becoming road worthy

X2

Christyep91 has one I think

We'll be going plenty bigger mate just want to wake her up first ha

no oil leaks as of yet which is good :cheers: filled coolant/water and of course one pipe was missed ha so once the water leak in the most awkward spot on the engine stopped i tightened up the clip and perfect no leaks few more bits on the way hopefully have them before the weekend but all is looking good for waking this lady from her sleep before the christmas also had a nice job of getting the temp sensor out that i rung off flush in the thermostat housing :pirat: removed charcoal canister just need to replumb venting and pointless bulkhead sensors removed the culprit :evil:

any idea what size the fittings left to be blocked off on the intake mani are? save me going out to measure them as i want to buy silicone blanking caps ha

Can all does sensors on the bulkhead be removed ? As far as my search has lead me to believe the sensors on the coilpack bracket are for air-con the charcoal canister is 50/50 but seen some removed an vented to box on the nearside chassis leg . Any one able to clarify this

definitely getting one just want to get it up an running first work out any flaws that i may or may not have

getting there ha 99% of pipework fitted checked and tightened just need a quick double check changed oil filter and filled with oil drained gearbox oil and filled with new oil clutch is ready to bleed powersteering is just waiting to find a custom s/s bottle hopefully just waiting on unf 12.9 grade bolts for my wilwoods on route from england just need to fit rear brake set up also all suspension needs tightening and fitting of arbs waiting on coolant temp sensor then can fill radiator picked up new rocker cover seal and spark plug seals from toyota short route hot pipe is on route and new polybush front arb bushes also wiring needs a bit of tidying up sensors connected up etc hope to get that done the weekend and a bit of tidying on pipework like catch tank etc but as far as i can see all i am left to buy is magnecore leads and we should be looking at turning the key in her ha :cheers: :cheers: really need to get a shiny wepr manifold kit in her , wont be long :roll: did get a little side tracked bought myself a zep dash pod for my gauges mainly cause i hate seen wires running around the dash anyone got a link to wiring the starter? dont want to mix up wires but id imagine all the connectors are different sizes so can only take correct wire but just incase also anyone with a powersteering bottle and nut and bolt off the top hole of the starter where it mounts to the gearbox get in touch with me ha also can i run without a dumpvalve? few pics as always

Bought one before but can't remember also missed that one few weeks back

Anyone selling one before I buy one new

Bump

Got my water/oil pipes from tuning very impressed seem top quality... Rw developments catch tank landed gave it a quick polish also got new injector seals and made up brackets to mount my intercooler, cleaned an primed the trd front anti roll bar to ... Good evenings work ha ive probably made more progress in the last few weeks then i did in the entire attempt at first build on this car also have picked up oils and coolant