Jump to content

Terry1.3GTT

Member
 View Profile  See their activity

  • Content Count

    174

  • Joined

  • Last visited

 Content Type 

Everything posted by Terry1.3GTT

  1. Terry1.3GTT
    I dont really know what to offer, dont know what its worth.
  2. Terry1.3GTT
    £43.78
  3. Terry1.3GTT
    Yes mate 4e needed cheers anyway tho
  4. Terry1.3GTT
    As above good crank needed, posted to norwich. Money ready to go in paypal cheers
  5. Terry1.3GTT
    Good crank needed as the one i have to rebuild is kafooked...... Cheers
  6. Terry1.3GTT
    Any joy on the bracket Shaun??
  7. Terry1.3GTT
    They are the same. Do you have one?
  8. Terry1.3GTT
    Also need Steering rack passanger side bracket Engine hooks ( lifting engine)
  9. Terry1.3GTT
    Il get a couple of bolts to try first
  10. Terry1.3GTT
    Ahhhhh cheers dude good point, think they are m10's if anyone can shed any light on that one???
  11. Terry1.3GTT
    Ok perfect Shaun and thanks Funny Onion that would be cool. Still after Gearbox to engine block bolts (so i can put this block on a stand) Also looking for uprated inlet mani
  12. Terry1.3GTT
    If you bring them to JAE i will have them deffo.
  13. Terry1.3GTT
    Looking for the following bits to really help the new build come along...... Crank pully bolt - (sorted) Thermostat housing cover/ or complete part ..dont need sensors - (sorted) Gearbox to engine bolts for putting block to engine stand Uprated inlet manifold These bits to start but might add some bits to the list. Cheers
  14. Terry1.3GTT
    Can i get the thermostat cover with sensor?
  15. Terry1.3GTT
    In need of the splined bit that goes from the steering column to the joint of the steering rack. Any help would be much apreciated Cheers
  16. Terry1.3GTT
    Il take gearbox if its going 👍🏼
  17. Terry1.3GTT
    That would be awesome if you did mate Cheers.
  18. Terry1.3GTT
    That sounds like an offer i cant refuse drongo
  19. Terry1.3GTT
    Yeah deffo take that mate. Ate you going to JAE? Yeah deffo take that mate. Ate you going to JAE?
  20. Terry1.3GTT
    Gearbox bellhousing needed for starlet GT/glanza Cash waiting for one.......pleeeeeeeease help 👍🏼
  21. Terry1.3GTT
    Whats out there, cash waiting
  22. Terry1.3GTT
    I have a Blitz sbc I-colour black edition for sale but its not too cheap bud 325 posted for it
  23. Terry1.3GTT
    Retard timing by a degree or two. Sounds like its det
  24. Terry1.3GTT
    Fuel pump?
  25. Terry1.3GTT
    If air fuel was wrong i think it would cut out. My symptoms were, when i pressed throttle all the way down, it just revved to 2000rpm then cut , then back to 2000 then cut almost like you are just stabbing the throttle on and off. New ecu arrived this morning, fitted buy the garrage and all is back to normal. Pick it up on monday.
×
×
  • Create New...