Terry1.3GTT
-
Posts
174 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Events
Everything posted by Terry1.3GTT
-
I dont really know what to offer, dont know what its worth.
-
£43.78
-
Yes mate 4e needed cheers anyway tho
-
As above good crank needed, posted to norwich. Money ready to go in paypal cheers
-
Good crank needed as the one i have to rebuild is kafooked...... Cheers
-
Any joy on the bracket Shaun??
-
They are the same. Do you have one?
-
Also need Steering rack passanger side bracket Engine hooks ( lifting engine)
-
Il get a couple of bolts to try first
-
Ahhhhh cheers dude good point, think they are m10's if anyone can shed any light on that one???
-
Ok perfect Shaun and thanks Funny Onion that would be cool. Still after Gearbox to engine block bolts (so i can put this block on a stand) Also looking for uprated inlet mani
-
If you bring them to JAE i will have them deffo.
-
Looking for the following bits to really help the new build come along...... Crank pully bolt - (sorted) Thermostat housing cover/ or complete part ..dont need sensors - (sorted) Gearbox to engine bolts for putting block to engine stand Uprated inlet manifold These bits to start but might add some bits to the list. Cheers
-
Can i get the thermostat cover with sensor?
-
In need of the splined bit that goes from the steering column to the joint of the steering rack. Any help would be much apreciated Cheers
-
96 Glanza V BREAKING (High spec, fresh respray, WEPR)
Terry1.3GTT replied to Jordk's topic in Breaker's Yard
Il take gearbox if its going 👍🏼 -
That would be awesome if you did mate Cheers.
-
That sounds like an offer i cant refuse drongo
-
Yeah deffo take that mate. Ate you going to JAE? Yeah deffo take that mate. Ate you going to JAE?
-
Gearbox bellhousing needed for starlet GT/glanza Cash waiting for one.......pleeeeeeeease help 👍🏼
-
Whats out there, cash waiting
-
I have a Blitz sbc I-colour black edition for sale but its not too cheap bud 325 posted for it
-
Retard timing by a degree or two. Sounds like its det
-
Glanza idles spot on.. Bogs/wants to cut when rev
Terry1.3GTT replied to DRiiFTiE's topic in Ignition & Fueling
Fuel pump? -
Wants cut out if you rev more than 20-25% throttle?
Terry1.3GTT replied to DRiiFTiE's topic in Ignition & Fueling
If air fuel was wrong i think it would cut out. My symptoms were, when i pressed throttle all the way down, it just revved to 2000rpm then cut , then back to 2000 then cut almost like you are just stabbing the throttle on and off. New ecu arrived this morning, fitted buy the garrage and all is back to normal. Pick it up on monday.