steviet

Happy days Marc.

Is this beening offered as a turn around service Marc ?

Bump

any pics,what colour etc.

Try and get the switch with the plug on back of it with some of the wiring,makes it a hell of a lot easier when wiring. So that you can just match colours of wiring to colours on wing mirrors. Theres a tudior somewhere on forum.

After a full set of alloy wheel nuts to suit a ep91,used or new. Stevie

Top work Marc.

bump

BUMP

Haven't any radio /cd player mounting brackets & cage amoung your stock pile ?

Ok as many of you connect your JAM FCC onto the ecu, as i have done, but it didn't work as it should, so i connected it to the MAP Sensor. 1st, unplug the Map sensor, theres 3 wires Cut the middle wire, not too near the plug, as you will need to use most of the wire for connection. On the JAM FCC there 4 wires: RED = 12v live - Conneted to the IGNition behind the key switch. BLACK = Earth - Connected to the nut holding the MAP sensor. WHITE - Connect it to the wire coming out from the MAP sensor. GREEN - Connect it to the other half on the cut wire. Make sure the White and Green wires are connected to the right place. Or your car will start up funny. Get some strong 2 side tape, stick the unit on the wall. Job done

BUMP

Take the instrument cluster out and check that all the bulbs are working,or do you have a dimmer switch for cluster ?

Welcome to UKSO.

Looking well Marc,just need that spoiler fitted now

Has anyone got the above for sale?? For ep82. Stevie

Went to wire up my cd player into GT today,but cant seem to find small plug on dash loom that mates up with four pin white plug like shown above. Is the two plugs on dash loom beside each other ??

Some thing like this might help you out . http://www.ebay.co.uk/itm/Pack-T-5-Bulb-Color-Covers-Light-Filters-Lens-Cap-Automotive-5mm-T1-5-no-bulbs-/271155487538?pt=LH_DefaultDomain_0&var=&hash=item3f22206332

This might help On the JAM FCC there 4 wires: RED = 12v live - Conneted to the IGNition behind the key switch. BLACK = Earth - Connected to the nut holding the MAP sensor. WHITE - Connect it to the wire coming out from the MAP sensor. GREEN - Connect it to the other half on the cut wire. Make sure the White and Green wires are connected to the right place. Or your car will start up funny.

pm sent

bump,brackets anyone??

Hmm,wouldn't mind a purple set

bump

No probs let me know when you have decided.