-
Content Count
213 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by Mitchell
-
-
I wouldn't advise doing it yourself- there are companies (like arch enemy) who might be able to advise....
Hmmm seems like a lot of hassle, i might just go for the 7j et20, is there as much work involved with these? An is the offset right? Sorry for all the questions i just dont wanna buy summet an not be able to fit them , thanks
-
How do i go about flareing the archers? CheersYou're probably not going to get away with just rolling the arches with 8j et0. You're going to need to flare the arches a fair bit too, and as above, maybe cut out the inner arch.
A lot of work but i think they look awesome with low offset wheels!
Mine are 15x8 et17 and they rubbed like hell- had to lift it by about 15mm on the back and put 185 tyres on them so the tread was in the arch.
-
What about rolling the archers, wont that solve it?
-
As above will i have any problems with stretch or rubbing ?cheers
-
Do you have 2 of these???))
-
Were abouts are you pal?
-
Just recently purchesed a glanza an need a few bits too tart it up a bit, anybody got anything?
-
Imafter some really grippy tyres for my glanza as what i have at the minute are dogshit, preferably something pretty slick, but also fairly long wearing, im looking at around £300-£400,for a full set, what are you guys running and what do you think? Cheers
-
I've got 15x8 et17 work wheels with 185 55 15 tyres on them and it handles like you wouldn't believe (with cage, coilovers, braces, anti roll bars etc)
Literally handles insanely well.
I'll be going for 195 50 15's when it next needs tyres though, only went for 185's as i cam across a full set cheap
You got any pics so i can see what it sits like? tarr
-
Im looking at getting some new rota grids/grid v's, for my glanza,but im not sure What width to go for, im looking at 15x7 or 15x8, im willing to roll my archers but i dont want to compromise handliing, also what would be the best tyre size for each, cheers
-
Cheers man, id scrolled straight past the write up by asad first time round :')
-
Soo I've been after a starlet for a while, an finally at the weekend have been an picked one up, im gonna give it a full service this weekemd, its a 96 glanza with a tdo4 turbo running 0.6bar (to be on the safe side) an a few other uprated parts, just after some advice on what to look out for in maintenance wise, too keep her in tip top condition, any help an advice would be much apreciated, cheers
15x8 et0 195/50 fitment
in Alignment & Alloys
Posted
Really confused now :/ your running 185's an hes saying 195's too stretched ?:s