silkfinish
-
Content Count
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by silkfinish
-
-
Hi mate sorry for the late reply now I'm seeing this getting really stressed now with it all this is where i have gone wrong with the Looms they are all mixed up now I think I got a ep82 engine and engine loom I've taken my glanza s 4efe dash loom out bought a glanza v dash loom and put that in it's still got the 4efe glansa s boot loom tho for pump and lights not the v loom
Also what I can see to is some one has added the extra plug for the glanza v ecu to the gt engine loom so it's a gt engine with glanza ecu
Thanks for the reply
-
Hi guy need a little help
Recently converted a glanza s to a glanza v
Things already done
Changed engine
Dash loom.
Engine loom
Changed ecu
Can any one tell me if I have to change the fuse box ? Or any other looms
I have left the s fuse box in the car and just swapped terminals from one loom to another under the cover
I can't get the fuel pump to come one when I turn the key
Also does the coil need to be connected for any circuits to work
Any help much appreciated want to get her started now 😣 !!!
-
hi can some one please help
I have converted my glanza s to a glanza v using what I think is a gt engine and engine loom.
i took the glanza s dash loom out and replaced it with a glanza v loom i can see a lot of plugs left over can some one please help me in pointing me in rite direction with this will this be ok glanza v dash loom with gt engine and engine loom and will i need to change the fuse box under the bonnet as i have just taken the negative and positive cables out of the fuse box and of the glanza s and put the ones off my engine loom in to fuse box
also does some one have a diagram of all the earthing points throughout the engine bay and around dash area
car turns over but there are still a lot of things not working thinking because of earths or maybe something to do with loom and why i got so many plugs left over cant hear no fuel pump though
please any help as i am really stuck now thanks you guys
-
how much for exhaust inter cooler and piping combined and do you have a fcd cheers
-
have recently started my project and am not far from finishing but have come across some problems
firstly I bought a normal starlet that some had had previously converted with a 4efte engine with most or the td04 kit on it. it was rotten so I stripped the car and bought a cat d light panel work glanza s downer car that I would be putting the 4efte engine in to
every things in now engine shafts wheels linkages etc the only mistake I made thinking that I wouldn't need the dash loom so I scrapped the car with this still in lol
any way I definitely need this rite as I can see that the glanza s dose not have the key reader ring around the key hole what exactly do I need to change in the car for the conversion is there any other looms I need to change that I might have scrapped like the fuel pump loom etc .. ?
I need a wiring diagram if possible showing earth points etc
what size exhaust/bore size would I need for the td04 setup as I don't think its rite one that previous owner has used ?
and if any ones out there has a diagram to plumb in a fuel pressure regulator ?
one other thing I have come across when I stripped the other car it didn't have power steering I would like to put this on the car so I took it off the glanza s engine and put it on the 4efte engine before putting the engine back in glanza s shell I cant seem to get the brackets on off the glanza s engine as it hits the oil sandwich plate where oil filter is do you know if the brackets and adjuster for belt tension is the same off n/a engine to the turbo engine or any pics that could point me out
getting quite stressed as its near enough finished any help would be much appreciated you guys cheers
-
hi do you still have the dash loom thanks
-
hi as any one got a dash loom for a ep91 am in desperate need of one asap
Glanza v conversion
in Electronics
Posted
How much for the loom mate is it the complete loom the fuse box and the other engine loom that goes to ecu ?