scott-d-

On ‎2‎/‎12‎/‎2019 at 8:29 PM, glanzagee said:

almost two years any progress ?

 

Progress is good, not long now before it'll be finished. There were a few hiccups along the way and a few changes in the spec list too, but it won't be long.

On ‎2‎/‎15‎/‎2019 at 10:25 PM, RobSR said:

That’s a long time to be waiting! Hopefully it’s done soon 

Shouldn't be waiting too much longer, well worth the wait though!

On ‎2‎/‎16‎/‎2019 at 7:54 AM, akyakapotter said:

Isn't far off I believe they have 2 big builds gong on at the same time both very near finished just the boxes to install now quaife wanted to build them something to do with their warranty.

Yeah, few little issues which have been sorted now, just the final few pieces of the puzzle to put together! :)

On ‎2‎/‎19‎/‎2019 at 5:53 PM, adzy said:

You prob saw since you asked about it but I found the magazine lying about, it’s the August 2017 issue

 

 

 

I've never actually seen this! Will have to see if I can get an issue somewhere! Thanks for that!

On ‎29‎/‎01‎/‎2018‎ ‎19‎:‎37‎:‎20, glanzagee said:

so this finally happend !

 

Nice purchase!

Currently also getting one of these fitted along with a full engine build and standalone etc.

Let me know how it goes buddy!

Mods please close!

Glanza Bonnet Wanted!

As it says, looking for a bonnet for a Glanza, preferably carbon or cruise etc, not really looking for anything standard.

Cash waiting

My missus bought it for me (lucky me!), and so far, it's visually stunning! Haven't had much time to play it, but the times I have played it, it's been great!

Gamertag: OutlawEP91    - for anyone who wants to add me  

Scott.

I'll settle for either, if they're meshed, great, if not, no biggie!

Running no dash would be sick lol nobody runs no dash start a new trend

I had thought about it and doing a wire tuck/heater removal etc but it's just too much and I still want it neat haha!

Soon to be all changed as I ditch the DEFi's for a full colour dash which I'm putting together to run with my standalone setup.

This is pretty much what I had in mind, looks so smart bud! Picking up a second dash at the weekend so may have to start doing something similar, it's the neat finish I had in mind!

How easy/hard is the flock to keep clean? Nightmare for dust etc?

Cheers

Looking for ideas for my dash, was looking at blanking the centre console off (as I have no headunit etc) and then flocking but looking for some ideas, cut dashes etc...

Thanks in advance

Nice feature in retro magazine mate

In Retro Magazine?! I don't think I've seen that buddy, it's been in Japanese Performance but I can't recall seeing it in anything else... You got any more info on that dude?

How far along are you with the car? It's been there for getting on for 8 months now?!

It's all progressing nicely buddy, I've changed the spec a hell of a lot from what it was going to be and had a lot of parts ordered that need to be made and then imported... I will update the thread accordingly when there's more to tell, but for now, it's all being kept quiet, it'll be done when it's done

Just read this from start to finish, talk about getting stuck in! 😂 Great project, I'll certainly follow this one 😄👍🏻

Haha tell me about it, still, it's all good fun, and more of a case of "why not, let's just do it..." now 😂

Thanks buddy! 😃

Afternoon!

Yes they are almost complete - should be being finished and ready to be shipped to the UK within the next two weeks.

As I have mentioned to a few of the guys - we have comissed nearly 40 pairs across the 3 designs ( 80 indidividal parts ) which is a huge workload when utilising carbon!

I will be in touch with everyone to advice once they have been shipped and the lead time to the UK. It will be at this point where the teaming 50% will be for those who didn't pay in full

Best wishes

Simon

This is great news! As soon as they've landed in the UK I'll take a drive down and pay the other half cash... Mega stoked for these!

Any further news on these yet guys?

I'll be down that neck of the woods soon and if they were ready I could have collected and paid the final amount cash.

Can't wait to see the finished items!

All the best,

Scott

Can't wait to get these, got a nice little selection of parts ready to fit when the car comes back, these will be the icing on the cake!

Where the cage covers from

Mate ?

Demontweeks dude

Been ordering a few more bits while the car is away, so it'll give me something to do when it comes back!

Ordered my carbon Livesports wings from Simon and Rob at Fiske Automotive, plus the girlfriend has informed me of a custom car related Christmas present, which I'm mega excited for!

Also had my carbon cage covers turn up the other day too!

Of course not everything I purchase will be uploaded though, some things will be kept secret until it's all finished

Scott

Deposit paid

I had the same thought when i took it down soon wears thin ....

It's all well and good, I knew it could potentially take a while to complete before I initially took it down and decided on the spec...

The best things come to those who wait as they say

On the plus side, it gives me time to get a few more things designed/ordered for the car

Morning All,

Great news, the EP91 pre sale is now full for the livesports style front fenders! As I am sure you are aware these are +20mm over stock, Livesports have also previously confirmed that the maximum wheel the new fenders can take is +15 225/45/16.

The next steps for everyone is;

- Payment of deposit - once a 50% deposit is received from each signed up member the oe items will be ordered and allow carbon fibre items to be produced.

- The due date for all deposits will be the end of next week (18th December 2016)

- The deposit total is £200 leaving £199 due when goods are ready to be shipped / collected. As per the title post, shipping is additional and collection is FOC.

- The payment methods are bank transfer / paypal / cheque (if people still do this)

Thank you very much and nice work for bringing some legendary fenders to life in carbon like never before!

Simon

Hi Simon,

Could you please send me your PayPal address and I'll send the deposit over in the morning,

Thanks!

I'd 100% take a fuel flap.

Regarding payment, what we doing, PayPal, Card? And when is it due?

Cheers

Not a problem, moved it across for you.

Hi Rob/Simon

Could I also be moved across please, as much like James I wasn't aware that the Livesports were being produced in carbon. Apologies to everyone else,

Scott.

Thanks for the input,

I haveread through your build. Marmite but I love it

James

No problem buddy, happy to try and help where I can. Yeah it's very marmite haha, but it's nice to stand out sometimes!

Thanks James,

Scott.

Evening Simon/Rob,

Stick my name down for a set please,

Cheers!

I want to see pics, can they be a choice of colour to at extra cost?

Some pics of mine for you bud!

They're the only ones I can find on my phone at the moment, sure I have more somewhere.

Well i hope they don't take 13+ months to complete yours.

I hope not, but in all honesty, it's a very big build, so it'll be finished when it's finished. I'm mega stoked for its return, but it'll be worth the wait no matter how long it takes!

SOLD.