Matthewep91v

Year: 1996

Model:Glanza v

Tax:N/A

MOT:03/03/2017

Mileage:103,000km

Description:

Year: 1996

Model:Glanza v

Tax:N/A

MOT:till 03 March 2017

Mileage: 103,000 km (80000 miles)

Description:

Here for sale is my 1996 Toyota starlet Glanza v

I really really regret having to put this car up for sale but needs must. This car is such a pleasure to drive and is ridiculous when it comes on boost. And when on boost it pulls really hard all the way to the red line. Around the corners it acts like it is on rails such a fun car to drive. And turns heads everywhere it goes.

Good points:

Engine does not leak oil unlike so many 4efte's out there. The body work of this car in immaculate. There is zero rust on any of the arches and the underside of the car is also rust free. The enkie wheels have been powered coated and are also immaculate. All discs and pads have plenty of meat left on them. The TD04 turbo was fully rebuilt and balanced by midland turbos and they have done a fantastic job spools up really fast and the penny has been welded correctly so that will not cause any issues. The WEPR manifold, downpipe and screamer pipe are all in perfect condition no flat spots or cracks. This car comes with the super rare buddy club spec 2 exhaust which sounds amazing and is very loud it is also in perfect condition without any blows. The front mount intercooler has had all its fins straightened out to give an extremely clean look to the car. All of the intercooling piping is fine with zero boost leaks. Clutch is only a few months old barley 2000miles on it, as it is an unsprung clutch it is either on or off but as soon as you get use to the feel it will feel lovely to drive with. The AD08 tyres havent seen many miles have loads left on. Servicing is taken out every 3000 miles without exception.

Bad points:

Just needs a speedo cable.

Glanza spec

1996 Toyota Starlet Glanza V

1A0 Silver

Engine:

Recently had a new engine (gt turbo engine)

Greddy Emanage Blue

TD04 Turbo (oil and water cooled)

WEPR Ramhorn Manifold

WEPR down pipe

WEPR Screamer pipe

Buddy Club Spec 2 exhaust

Genuine Tial MVS Wastegate

Japspeed Front Mount Intercooler

Spec stage 4 6 puck paddle clutch (unsprung)

Triple core alloy rad

Tuning Developments Fuel Pressure Regulator

Tuning Developments 255ltr fuel Pump

Tuning Developments 430cc injectors

run on wastage spring (1 bar)

Magnecor Leads

Blue Silicon Hoses

Tegiwa Engine Damper

Air Con Removed

Full poly bush engine and gearbox mounts

238.3 bhp @1bar

The car has just come back from tuning developments where it had:

.Brand new 430cc injectors +new seals

.New water and air temp plugs replaced

.ngk iridium spark plugs (heat range 7)

.Toyota inlet manifold gasket

.Toyota dipstick tube oring

.Toyota water pump feed oring

.Toyota water pump

.Timing belt kit

.Auxiliary belts x2

.Engine oil and filter

.Toyota forlife coolant

.Mapped at 1bar which made 238.3bhp

Total cost of £1073.45

Exterior:

Carbon culture front bumper

96 Spec Rear Bumper

96 spec optional rear lip

ID-Workz Livesports spoiler

Stock Sideskirts

OEM Wind deflectors

Reflet rear lights

Enkei RS One Piece 15" Wheels recently powder coated black

Handling:

Advan ad08r's 195/50/15

BC BR Coilovers

Whiteline Front ARB

Whiteline Antilift kit

Levin twin pot brake upgrade

EBC pads

Front Strut Brace

Polybushed Wishbones

Tegiwa Brake Stopper

Aero wipers

De-wiper Rear

Interior:

Cobra Alarm/Immobiliser System

Evo8 recaro's

260mm steering wheel

TRD horn button

Cruise gear knob

Toyota blanking plate

Prosport Boost Gauge

Uprated Front Speakers

Optional Extra Cupholders

Original EP91 Starlet Mats

Bad points - The car was listed as a Cat D. Many years ago it had some parts replaced by insurance and therefore it's a cat D. The damaged parts were replaced with genuine Toyota parts for which I have receipts for the work and the body is straight, no damage to the floor pan. The parts that were replaced were-

Front bumper

Headlight

Wing

Crash bar

This does not affect the cars condition now nor does it affect the insurance.

Feel free to ask any questions. I have a full folder of all the cars information.

Price: £4000 / Offers

Pictures:

More pictures can be added if needed as well as any more information about the car.

Contact Details:

Feel free to pm me

Or give me a text or a ring on

07703354340

Cheers everyone

Bump

Nahh sorry mate just looking for a standard front bumper

Cheers though

250ono mate

hi mate

can you send me some pictures please.

and what price you thinking? or would you make a deal with the carbon culture?

Hi guys and girls

I am looking for a stock looking front end.

Either a 1996 or a 1998 AO1 if possible

I currently have a carbon culture to offer ifor the deal is right

Cheers

Haha she is going in the garage for winter I think haha keep her safe

Well it's been a while and I am over the moon I am so glad to see her!!!!!!!

Running as smooth as anything she sounds amazing

Yeah that's the plan just can't wait to see her againame

That is a brilliant idea!!!

I think I am going to get it re routed in but send it to wepr so see if they might be able to sort somthing out

I want it doing properly

Update time:

So one day I was driving about and I noticed my car was not happy. It drove horribly and it didn't want to boost so I pulled up and heard some not very nice noises coming from the engine.

So I decided to leave no stone unturned to find out this issue.

First things first drain the oil and pop off the sump to look for any metal shaving but good news there wasn't any so I left that there.

Next the engine was compression tested and the results where not good at all. Extremely low across all 4 of the cylinders.

So just to check the rocker cover was removed and to my surprise the cam shafts where actually finger tight which got me worried extremely worried.

At this point I though the best thing to do would be to remove the engine and have a good look round the block and check everything else on the engine. After torquing the cams down the engine was timed up and put back in the car.

And we'll the car would not start at all just wouldn't fire.

broken :'(

So at this point tuning developments was my best option. So the car was sent to Mike and he found many issues with the car.

Intake gasket leaking

Injector wiring was damaged

Injector 1 only worked when it wanted to and the other 3 had their own issues too.

Many many oil leaks

Water pump was leaking

Both auxs belts and timing belt where not in good shape and needed changing

The cam timing was way out

Coolant temp sensor plug was replaced

All these issues have now been fixed by tuning developments and it has had a new gasket kit and the engine has been checked over to make sure there are no other issues. They also compression tested the engine with good results this time 170+ on all 4 cylinders.

Which makes me think it was either a dodge compression tester or the loose cams that where causing the earlier low results on the compression.

So Mike has:

Put in a new set of 430cc injectors and new seals

A full gasket kit

Repaired the injector wiring and put a new plug on the coolant temp sensor

Sorted all of the oil leaks (thank god)

A brand new Toyota water pump

The engine has been timed up correctly with a new timing belt and tensioner kit

Both auxs belts have been replaced and tensioned correctly

I am so glad all these issues have been sorted now. The engine is very healthy and has no more issues woop woop

The proof of this is when it went back on the dyno to check the car is running as it should and produces the power it should.

Which it did!!!!!!!

240bhp @ 1bar

On the up side had one hell of an awsome time at JAE even if my glanza didn't make it. It was awsome to catch up with everyone and have a good time.

Pictures will be on the way soon as the glanza gets home on Saturday.

Baby-faced assassin out!!

They will be up soon just gonna sort the update out now.

Feels better and I can see the light at the end of the tunnel as the glanza will be back on Saturday.

Big old thumbs up from me! Looking forward to seeing pictures and more info

James

How's the glanza hunt going mate

Hahahahaha

Lovely advice

My other reason is the police love it too hahaha

Damn was hoping it would of been a bit simpler than that

Hi guys and girls

Just wanted some advise on how I would go about feeding my screamer pipe back into my exhaust.

As the car is used as a daily the screamer is just starting to get alittle bit annoying. I run a buddy club spec 2 exhaust and that is way loud enough so the screamer just pushes it over the top.

I have a TD04 WEPR ham horn kit on my 1996 ep91 glanza v.

Any advice would be appreciated

Cheers

Well it has been a while but I will have a big update coming up!

Long story short, I have had issues with my glanza so it was sent away to the world on tuning developments but now it is coming home after having a sizable amount of money spent on it but I am glad it's coming home.

I will update with many many pictures and information and videos.

But the car has actually made more power than it did last time it was at tuning developments

240bhp @1.0 bar

Update soon.......

Welcome to UKSO

Where dreams happen

Hi

Could anyone help me out with timing of the cam shafts on a 4efte gt engine

I have timed the engine up with the 4e marking on the cam pully and I have timed the bottom crank pully up

But I am unsure if the cam gears are also out of time.

Because the timing has been messed with and the car is no longer starting

Really need help

Cheers guys

All sorted used a bit of lube and they sealed up

Cheers for the replys

I have just bought some toyota injector seals from ID-Workz and I am having trouble getting them to seal properly they are just pissing out fuel.

Am I doing somthing obviously wrong is there a special way of fitting them.

Standard fuel rail with tuning developments 430cc yellow injectors

How much for 96 bumper ?

All paid for mate

See you there

I'm in blackpool pal