-
Content Count
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by geofreygachie
-
-
4x100 PCD
The offset and width is very weak but to answer your question then yes I would think they will fit.. It's just a matter of if they go over the brakes.
Kindly help me understand what you mean by "weak offset and width" .
-
A buddy is selling a set of four size 13 alloys.Just checking if i can have them on Starlet ep91 YOM 1998.
PCD 100
Offset 35
13 x 5j
Cheers.
-
I managed to have the system working again by replacing the bulbs on the left hand side .So far so good.Thanks to everyone who helped me resolve this mystery.
-
I had a thorough check on Wednesday and i didn't find a short circuit , what i noted is that i had to press the front left indicator bulb for it to work, I tested the system for a couple of times and all was well.I tried to clean the socket contacts and i was happy to have fixed the problem.
FFWD..... this morning i hopped into the vehicle and the indicators were not working again infact the fuse had blown and now all the indicators/hazard + horn are not functional.I think its time for me to visit a pro on this since its now beyond me.Very frustrating.
-
if the bulb is bridging on itself it will make your fuse blow. change bulbs again and report back they are only 99p each
I will try that tomorrow and report back.
-
As Richard said. But for it to blow a fuse like that it must be a dead short. Replaced any bulbs recently?
The only bulb i have changed was an indicator but its on the right hand side and the problem i am experiencing is on the left hand side.
-
Have you checked the bulb by any chance lol?
I had a look earlier in the day and it seems ok, but I didn't think of swapping with the right side one .
-
Can a bulb make a fuse to blow ?
-
Hello All, I am puzzled by a problem that cropped up yesterday at night.I am having a problem with the left indicator function and horn.Anytime I indicate left the system blows the fuse,the same happens when i press the hazard indicator.I replaced the fuse to test and noted that indicating right does not blow the fuse.The left indicate function blows a fuse at the fuse box below the steering column which is rated at 7.5 A or a 15A at the engine bay.The 15A affects the horn.What could be the problem ?????
-
I did minor service on EP91 and i have noted that in the morning the bonnet vibrates unlike before.The only thing i did was use flushing oil since the engine was filled with deposits and instead of using the synthetic Toyota 5w 40 w i used Shell 15w 50W mineral oil since i intend have a comprehensive service in less than 2 months time.
Could the oil be the problem ?
-
I am contemplating changing the 3 speed auto transmission if at all it's possible to a four speed auto ,kindly advise if this is possible and if the changes are major.Thank you.
-
I am planning to have the car serviced tomorrow but in a dilemma, my plan is to use Shell sythentic oil this time .Considering the Kenyan climate/weather whats the ideal Shell synthetic oil viscocity specification i have never understood the W's.
How long am i supposed to use the vehicle before draining fully synthentic oil ?
-
I contacted Toyota Kenya and they quoted TOYOTA GENUINE SUPER LONG LIFE COOLANT ,get it tomorrow and flush the system .
-
Welcome ,Jatelo karibu .
-
You want red genuine Toyota pre mixed! Don't be mixing coolants..
Thank you ,let me check if i can get it locally.Is 5 Litre enough ?
-
I am in a dilemma , over the weekend i helped my friend with my starlet.He was to travel almost 400Km and before the journey he went to a local Total Service Station where the attendant had a check on the car and they advised him to top up the coolant.He bought a litre of the Total COOLELF Auto Supra coolant( pink- orange )and topped up the reserve with almost half a litre.
He drove all the way and back with no problem.
When he got back is when i saw the container and i realised that he had mixed the original green coolant with the above.On checking around the internet about if its safe to mix i read that its not safe since the mixture turns acidic and corrodes the engine and radiator.Kindly advise if this is true ?
I have shopped around for "green" coolant and only found the below.Is it good for starlet engine?
-
Izeeeeee bro.. Which side in Kenya??? Am in mombasa. Welcome to the club man
Nairobi.
-
The Legend is welcome ,i am in Kenya too with an ep91.
-
I will open the cover before the end the week at report my findings here,I have observed that the leak seems to happen everytime I drive.When the vehicle is parked the leak seems to go away .Asante @bean.take the cambelt cover off and have a look, it could be leaking from the rocker cover, the cam cap seals, oil pump maybe or the crank seal low down.
*" Asante" is Swahili for thank you.
-
I have just noted a very weird thing.The passenger seat belt indicator flashes when a passenger fastens the seat belt.What is going on ? I thought it should flash anytime a passenger doesn't fasten the belt.
-
You will get tons of information to help you make the best of your ride.All the best.
-
Many people say that a starlet that doesn't leak oil, doesn't have any oil in it lol
Both my 4e's have had leaks in that area, common fault I'm afraid
What puzzles me is that, a week ago there was no leak and nothing has been touched "inappropriately" on the engine bay.I will give it another thorough check this week and I hope I will find the source of the leak.I want to point out what the problem so that when I visit the mechanic he will not make me buy almost all the seals available locally in the hope of him trying to fix the problem.
-
I have a slow oil leak on the area near the belts and timing system.I have tried looking the specific source of the problem but i can't pin point.Aaaargh 😠.
The leak was not there in December last year.Is this a common problem or it's just an isolated case ?
-
How do i check if the starlet is a 3 speed auto or 4 speed auto ?
Front wheel bearing.
in Chassis & Suspension
Posted · Edited by geofreygachie
One year down the line I suspect I need a new front left wheel bearing ,the wheel are has some strange noise where the vehicle is in motion and currently I have even parked the vehicle till I have sometime to visit garage and have it done .The bearing was replaced December 2015.