garbs

Evening,

‘could someone please tell me the pitch/thread size of the oil filler cap please?

many thanks.

3 hours ago, akyakapotter said:

sent you an email bud. 

cheers nick. 

Could you send me that email as well please? Also have a kit that needs fitting.

Thank you.

One final question, is the ‘light’ version suitable for a car running under 300bhp or should I go for the bigger option?

Thank you very much 

Am looking to purchase an Orc clutch which I believe comes with a flywheel.

am I best using the one with it or purchasing a separate lightened flywheel?

cheers.

I’ve purchased a set of the Fiske livesport wings which are 20mm wider than standard [lovely items by the way].

I’m now on the lookout for a new set of wheels [15"] which will need a lower offset to the fill the front.

I believe an et25 will fill the fronts but would stick out at the rear, meaning the rear arches will need rolling.

With this, how much would the rear need bringing out please?

And should I still with 7" width or go to 8"?

Many thanks.

Cancel my last question, found them via Google

45 minutes ago, H_D said:

search for hose end finishers ebay/google.

 

I had mine made locally....

 

Thanks for the reply.

what connections did you use to the block?

Is there a better, neater and more aesthetically pleasing way of connecting these lines to the block instead of jubilee clips please?

Anyone close to Birmingham who can do the above with their eyes closed and could help do this for me please? For payment, obviously.

Just want my car done and on the road ASAP, I haven’t got the time or knowledge to do it.

many thanks.

As title please.

Must be in great condition.

Many thanks.

1 hour ago, RobSR said:

You'll just have to get some wider fenders..

Who does them? 

Yes you can as I was only speaking to Kerri a week or so ago.

Drop him an email or phone him. He couldn’t have been any friendlier or helpful. 

Nice!

Have they been re sprayed or had a special plastic back to black treatment?

Made my first order today with Tegiwa after I asked if they had any engine torque dampers in stock (it appears they did but weren’t on their website by accident).

anyway, they couldn’t have been more helpful and friendly. A genuinely professional experience of dealing with them.

will most certainly be going back.

After a carbon TRD centre console surround (in very very condition if possible)

snap off steering wheel and boss. Decent stuff please, nothing cheap or nasty.

3 hours ago, RobSR said:

No probs!

I wouldnt recommend trying to run them on an Emanage however unless you are changing/have changed.

Also, i may have a spare tucked loom coming up for you. Will keep you posted 

It’s all part of my 2019 master plan Rob, the emanage will be going and a Link installed instead.

That tucked loom needs to be mine please! That’s also part of 2019’s plan.

11 hours ago, RobSR said:

Hi Adam,

We have direct fit available: https://fiskeautomotive.com/shop?olsPage=products%2Ftoyota-starlet-ep91-id1050x-injectors

Cheers,

Rob

Bloody hell Rob, I forgot you had them! D’oh....

These are the available injectors on their website, but none are glanza specific:

http://injectordynamics.com/injectors/id1050x/

which ones would fit the ep91?

many thanks.

6 hours ago, RobSR said:

Hi Adam,

Has the engine let go?!

If you are sturggling you can pickup a complete running 4efe for not a lot of money and use the crank out of that. 

Afternoon Rob.

no, the engine is running fine! ;-)

jist wanted to get a crank knife edged/polished etc, the sum of all parts etc.

i have sent you an email when you get chance to have a look please.

ta.

As title. Must be in decent condition, no previous work completed on it and can't have spun a bearing etc.

Many thanks.

As per title, ported/polished inlet manifold for a glanza v wanted please.

have a standard one that could be done, but if there is one out there already for sale, please let me know.

am aware there is one for sale in the for sale section, seller hasn’t replied to messages unfortunately.

many thanks.

I’m a paid member but still can’t reply to for sale posts.

40 minutes ago, SKINY said:

I've been having this issue for months, can reply in wanted section still.

Conclusion I've came to is nobody cares

Seems a bit daft if new owners like myself want to buy stuff and keep the scene going etc

selling stuff I can maybe understand the minimum post count as it prevents people just coming on to flog stuff.

Ah that’s pants!!